BS EN 752-6:1998

BS EN 752-6:1998


Full Specification Given Below:

Standard BS EN 752-6:1998
Title Identifier Drain and sewer systems outside buildings. Pumping installations
Status CU
Publication Date 15/09/98
Committee IST/-/1
Approximate Price 64.00
Notes
ISBN 0 580 30093 5
Pages 22
International Equivalent EN 752-6:1998
Descriptors Sewers, Sewerage, Drainage, Sewage engineering, Drainpipes, Buildings, External, Sewage pumping, Pumps, Planning, Design, Internal, Waterworks, Wells, Access, Environmental health, Structural design, Maintenance, Rising mains, Pipes, Diameter, Pressure, Fluid pressure, Manholes, Prime movers, Valves, Control equipment, Control devices, Electrical equipment, Alarm systems, Health and safety requirements, Bibliography
Cross references B 2500 (Austria), B 2501, B 2503, B 2504, B 5012:Part 1, B 5012:Part 2, B 5013:Part 1, B 5013:Part 2, B 5016, Austrian Water and Waste Management Association. Rules of Practice, Rule 5. Guidelines for the hydraulic calculation of sewerage pipelines, Rule 11. Guidelines for Technical calculation of foul water, stormwater and combined systems, Rule 14:Part A Guidelines for the prevention of accidents in sewer systems and in sewage treatment plants. Part A. Construction and equipment, 1983, Rule 18:Part B Guidelines for the prevention of accidents in sewer systems and in sewage treatment plants. Part B. Operation, 1987, Rule 19. Guidelines for the design of stormwater overflows in combined systems. 1987, Rule 21. Documentation of sewerage systems. 1989, Rule 22. Maintenance and renewal of sewerage systems, ZL.57.030/3-V-6/84 Technical guidelines for the construction,, extension and improvement of water supply and wastewater systems, financially supported by the Water Management Fund (Technical Guidelines of the Water Management Fund). Federal Ministry for Environment, Youth and Fa, DS 432 (Denmark), DS 475, Technical Directive for Urban Drain and Sewer Systems. (France), Chapter 1. General design data, Chapter 2. Calculation of rainwater flow rates, Chapter 3. Calculation of wastewater flow rates, Chapter 4. Dimensioning of pipe diameters, Chapter 5. Conditions for installation of systems, Chapter 6. Ancillary works, Chapter 7. Detention tanks for rainwater, General technical requirements for public contracts dealing with installation of wastewater systems., Chapter 1. General requirements, Chapter 2. Type and quality requirements for materials, Chapter 3. Design requirements including structural design, Chapter 4. Preliminary work, Chapter 5. Installation, Chapter 6. Commissioning requirements, Technical requirements for public contracts. Application for construction of pumping installation for rising mains of wastewater, E 44203 Design of pump intakes. Recommendations for installation of pumps, ATV Advisory leaflet M 101 (Germany), ATV Stan
Replaces
Replaces Notes
Replaced By
Replaced by Notes


To purchase this standard/document, please email
Obtain a Quote for BS, ISO, EN and IEC Standards





Back to Standards Direct