| Standard |
Official Title of Standard |
|
| BS 3F 116:1995 |
Specification for mercerized cotton fabric |
| BS 3F 121:1995 |
Specification for metallic slide fasteners for aerospace purposes |
| BS 3F 122:1989 |
Specification for two ply cotton fabric interlayered with polychloroprene for liferaft packs |
| BS 3F 126:2002 |
35 g/m$u2 nylon parachute fabric |
| BS 3F 129:2003 |
Woven polyester narrow fabrics for aerospace purposes |
| BS 3F 135:2002 |
Braided nylon cord with unspecified dimensional stability for aerospace purposes |
| BS 3F 63:1981 |
Specification for low pressure oxygen hose for aeronautical purposes |
| BS 3F 65:1991 |
Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene) |
| BS 3F 69:1979 |
Specification for packaging and identification of vulcanized rubber items |
| BS 3F 70:1991 |
Specification for heavy duty braided rubber cord |
| BS 3F 71:1991 |
Specification for light duty braided rubber cord |
| BS 3G 100-2.2:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Magnetic influence |
| BS 3G 100-2.3.0:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Standard test requirements |
| BS 3G 100-2.3.1:1969 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Vibration |
| BS 3G 100-2.3.10:1974 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Impact icing |
| BS 3G 100-2.3.11:1973 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Water-proofness |
| BS 3G 100-2.3.12:1991 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Fluid contamination |
| BS 3G 100-2.3.13:1973 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Resistance to fire in designated fire zones |
| BS 3G 100-2.3.14:1973 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acoustic vibration |
| BS 3G 100-2.3.15:1978 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Change of temperature |
| BS 3G 100-2.3.2:1970 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Temperature-pressure requirements |
| BS 3G 100-2.3.3:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Mould growth |
| BS 3G 100-2.3.4:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Differential pressure requirements |
| BS 3G 100-2.3.5:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Explosion-proofness |
| BS 3G 100-2.3.6:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acceleration requirements |
| BS 3G 100-2.3.7:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Tropical exposure |
| BS 3G 100-2.3.8:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Salt mist |
| BS 3G 100-2.3.9:1972 |
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Ice formation |
| BS 3G 100-3:1979 |
Specification for general requirements for equipment for use in aircraft. Characteristics of aircraft electrical power supplies |
| BS 3G 100-4.1.1:1982 |
Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general. Electrical insulation tests |
| BS 3G 100-4.1:1973 |
Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general |
| BS 3G 100-4.2:1980 |
Specification for general requirements for equipment for use in aircraft. Electrical equipment. Electromagnetic interference at radio and audio frequencies |
| BS 3G 101:1987 |
Specification for general requirements for mechanical and electromechanical aircraft indicators |
| BS 3G 148:1981 |
Specification for general purpose platinum temperature sensors for aircraft |
| BS 3G 197:1982 |
Specification for stud-type terminal blocks for terminations on aircraft electric cables |
| BS 3G 198-2:1997 |
Sleeves for aircraft electric cables and equipment wires. Specification for slip-on sleeves for identification purposes |
| BS 3G 198-4:1996 |
Sleeves for aircraft electric cables and equipment wires. Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
| BS 3G 210:1996 |
Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190$0DC) or nickel plated copper conductors (260$0DC) |
| BS 3G 230:2000 |
Specification for general requirements for aircraft electrical cables (second series) |
| BS 3G 231:1997 |
Specification for conductors for general-purpose aircraft electrical cables and aerospace applications |
| BS 3G 233:1990 |
Specification for electric cables for general airframe or equipment interconnect use (135$0DC), extruded insulation |
| BS 3HR 100:1978 |
Procedure for inspection and testing of wrought heat-resisting alloys |
| BS 3HR 601:1989 |
Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm) |
| BS 3J 12:1991 |
Specification for pressure-sensitive adhesive identification tape |
| BS 3L 122:1970 |
Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3) |
| BS 3L 124:1970 |
Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3) |
| BS 3L 125:1970 |
Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3) |
| BS 3L 51:1970 |
Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1) |
| BS 3L 58:1971 |
Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter) |
| BS 3L 63:1971 |
Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS 3L 78:1970 |
Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5) |
| BS 3L 80:1985 |
Specification for sheet and strip of aluminium-2$9D% magnesium alloy (temper designation-O) |
| BS 3L 81:1985 |
Specification for sheet and strip of aluminium-2$9D% magnesium alloy (temper designation H16 or H26) |
| BS 3L 86:1971 |
Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3) |
| BS 3M 45-2:1998 |
Aircraft tyres and rims. Test methods for tyres |
| BS 3M 60:1998 |
Separable tube fittings for fluid systems, 24$0D cone. General specification |
| BS 3N 3:2000 |
Breathing oxygen for airborne applications |
| BS 3S 102:1969 |
Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only) |
| BS 3S 105:1969 |
Specification for carbon steel (bar for the manufacture of forged bolts only) |
| BS 3S 132:1976 |
Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding) |
| BS 3S 144:1995 |
Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa) |
| BS 3S 145:1996 |
Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa) |
| BS 3S 500:1996 |
Procedure for inspection, testing and acceptance of steel sheet and strip |
| BS 3S 61:1964 |
Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (35/45 tonf/sq in: limiting ruling section 6 in) |
| BS 3S 62:1964 |
Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (45/55 tonf/sq in: limiting ruling section 6 in) |
| BS 3S 91:1977 |
Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells) |
| BS 3S 95:1967 |
Specification for 1$9H per cent nickel-chromium-molybdenum steel (90/110 kgf/mm$u2 (57/70 tonf/in$u2): limiting ruling section 150 mm (6 in)) |
| BS 3SP 168-169:2002 |
Ferrules and assembly wires for braided rubber cord assemblies for aerospace use |
| BS 3SP 170-171:2002 |
Braided rubber cord assemblies for aerospace use |
| BS 3SP 3:1943 |
Specification for aircraft material. Fork joints (low tensile type) (for sizes No. 4 B.A. to $9H inch B.S.F. inclusive) |
| BS 3SP 89:1983 |
Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings |
| BS 3T 51:1945 |
Specification for aircraft material. High pressure seamless copper tubes |
| BS 3T 53:1980 |
Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) |
| BS 3T 60:1980 |
Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm) |
| BS 3V 4:1929 |
Specification for aircraft material. Ash |
| BS 4001-1:1998 |
Care and maintenance of underwater breathing apparatus. Recommendations for the compressed air open circuit type |
| BS 4001-2:1967 |
Care and maintenance of underwater breathing apparatus. Standard diving equipment |
| BS 4006:1992 |
Specification for hand operated square drive socket wrenches and accessories |
| BS 4008:1991 |
Specification for cattle grids |
| BS 4009:1991 |
Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers |