Standard |
Official Title of Standard |
|
BS 5335-2:1991 |
Continental quilts. Specification for quilts filled with feather and/or down |
BS 5336:1976 |
Specification. Cores made of ferromagnetic oxides for use in high flux density transformers |
BS 5338:1976 |
Code of practice for zinc alloy pressure die casting for engineering |
BS 5339:1976 |
Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products |
BS 534:1990 |
Specification for steel pipes, joints and specials for water and sewage |
BS 5341-5:1976 |
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Ring grooves |
BS 5341-6.1:1992 |
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Vocabulary |
BS 5341-6.5:1992 |
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements |
BS 5341-7.3.1:1992 |
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Keystone and half keystone compression rings. |
BS 5341-7.4:1992 |
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for oil control rings |
BS 5341-8.1:1992 |
Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for multi-piece oil control rings. Specification for coil-spring-loaded oil control rings |
BS 5342:1985 |
Specification for rubber hoses for high-pressure saturated steam |
BS 5343-2:1991 |
Gas detector tubes. Specification for long term gas detector tubes |
BS 5344:1985 |
Methods for performance tests for rotary and percussive pneumatic tools |
BS 5346:1976 |
Specification. ISO metric trapezoidal screw threads |
BS 5347:1976 |
Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment |
BS 5348-2:1989 |
Methods for sampling meat and meat products. Preparation of test samples for microbiological examination |
BS 5350-0:1987 |
Methods of test for adhesives. General introduction |
BS 5350-A1:1976 |
Methods of test for adhesives. Adherends. Adherend preparation |
BS 5350-A2:1990 |
Methods of test for adhesives. Adherends. Guide to the selection of adherend materials |
BS 5350-B1:1978 |
Methods of test for adhesives. Determination of density |
BS 5350-B2:1976 |
Methods of test for adhesives. Adhesives. Determination of solids content |
BS 5350-B5:1976 |
Methods of test for adhesives. Determination of gelation time |
BS 5350-B8:1990 |
Methods of test for adhesives. Adhesives. Determination of viscosity |
BS 5350-B9:1984 |
Methods of test for adhesives. Adhesives. Determination of resistance to sagging (flow after application) |
BS 5350-C1:1986 |
Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of cleavage strength of adhesive bonds |
BS 5350-C13:1990 |
Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Climbing drum peel test |
BS 5350-C14:1979 |
Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 90$0D peel test for a rigid-to-rigid assembly |
BS 5350-C15:1990 |
Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in compressive shear |
BS 5350-C5:2002 |
Methods of test for adhesives. Determination of bond strength in longitudinal shear for rigid adherends |
BS 5350-C6:1990 |
Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in direct tension in sandwich panels |
BS 5350-C7:1990 |
Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of creep and resistance to sustained application of force |
BS 5350-D4:1976 |
Methods of test for adhesives. Adhesively bonded joints: environmental tests. Determination of staining potential |
BS 5350-E1:1976 |
Methods of test for adhesives. Sampling and analysis of test data. Guide to statistical analysis |
BS 5350-E2:1979 |
Methods of test for adhesives. Sampling and analysis of test data. Guide to sampling |
BS 5350-G2:1987 |
Methods of test for adhesives. Tests on anaerobic adhesives. Determination of static shear strength of anaerobic adhesives |
BS 5350-G3:1987 |
Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces |
BS 5350-H1:1981 |
Methods of test for adhesives. Determination of heat stability of hot melt adhesives in the application equipment |
BS 5350-H2:1982 |
Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of low temperature flexibility or cold crack temperature |
BS 5350-H3:1984 |
Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of heat resistance of hot-melt adhesives |
BS 5350-H4:1984 |
Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of maximum open time of hot-melt adhesives (oven method) |
BS 5353:1989 |
Specification for steel plug valves |
BS 5355:1976 |
Specification for filling ratios and developed pressures for liquefiable and permanent gases |
BS 5357:1995 |
Code of practice for installation of security glazing |
BS 5369:1987 |
Methods of testing doors; behaviour under humidity variations of door leaves placed in successive uniform climates |
BS 5372:1997 |
Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors |
BS 5377-1:1988 |
Assessment of laundering effects by means of a cotton control cloth. Specification for preparation and use of the cotton control cloth |
BS 5377-2:1990 |
Assessment of laundering effects by means of a cotton control cloth. Methods of analysis and test for the unsoiled cotton control cloth |
BS 5378-2:1980 |
Safety signs and colours. Specification for colorimetric and photometric properties of materials |
BS 5380:1984 |
Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads |
BS 5381-2:1998 |
Methods for determination of physical properties of tobacco and tobacco products. Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus |
BS 5381-4:1998 |
Methods for determination of physical properties of tobacco and tobacco products. Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper |
BS 5381-5:2002 |
Methods for determination of physical properties of tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods |
BS 5381-7:1997 |
Methods for determination of physical properties of tobacco and tobacco products. Loss of tobacco from cigarette ends using a rotating cylindrical cage |
BS 5381-8:1997 |
Methods for determination of physical properties of tobacco and tobacco products. Loss of tobacco from cigarette ends using a rotating cubic box (sismelatophore) |
BS 5383:1986 |
Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes |
BS 5385-1:1995 |
Wall and floor tiling. Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions |
BS 5385-2:1991 |
Wall and floor tiling. Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles) |
BS 5385-3:1989 |
Wall and floor tiling. Code of practice for the design and installation of ceramic floor tiles and mosaics |
BS 5385-4:1992 |
Wall and floor tiling. Code of practice for tiling and mosaics in specific conditions |
BS 5385-5:1994 |
Wall and floor tiling. Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings |
BS 5386-3:1980 |
Specification for gas burning appliances. Domestic cooking appliances burning gas |
BS 5386-4:1991 |
Specification for gas burning appliances. Built-in domestic cooking appliances |
BS 5388:1976 |
Specification for spray taps |
BS 5391-1:1976 |
Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe. Pipe for industrial uses |
BS 5392-1:1976 |
Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe. Fittings for use with pipe for industrial uses |
BS 5395-1:2000 |
Stairs, ladders and walkways. Code of practice for the design, construction and maintenance of straight stairs and winders |
BS 5395-2:1984 |
Stairs, ladders and walkways. Code of practice for the design of helical and spiral stairs |
BS 5395-3:1985 |
Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways |
BS 5396:1976 |
Specification for seamless steel CO$d2 containers for fixed fire-fighting installations on ships |
BS 5397-6:1990 |
High-level data link control (HDLC) procedures. Specification for multilink procedures |
BS 5398:1976 |
Classification of methods for mounting and joining of fishing nets |
BS 5400-1:1988 |
Steel, concrete and composite bridges. General statement |
BS 5400-10:1980 |
Steel, concrete and composite bridges. Code of practice for fatigue |
BS 5400-10C:1999 |
Steel, concrete and composite bridges. Charts for classification of details for fatigue |
BS 5400-2:1978 |
Steel, concrete and composite bridges. Specification for loads |
BS 5400-3:2000 |
Steel, concrete and composite bridges. Code of practice for design of steel bridges |
BS 5400-4:1990 |
Steel, concrete and composite bridges. Code of practice for design of concrete bridges |
BS 5400-5:1979 |
Steel, concrete and composite bridges. Code of practice for design of composite bridges |
BS 5400-6:1999 |
Steel, concrete and composite bridges. Specification for materials and workmanship, steel |