| Standard |
Official Title of Standard |
|
| BS 6100-5.3:1984 |
Glossary of building and civil engineering terms. Masonry. Bricks and blocks |
| BS 6100-6.1:1984 |
Glossary of building and civil engineering terms. Concrete and plaster. Binders |
| BS 6100-6.2:1986 |
Glossary of building and civil engineering terms. Concrete and plaster. Concrete |
| BS 6100-6.3:1984 |
Glossary of building and civil engineering terms. Concrete and plaster. Aggregates |
| BS 6100-6.4:1986 |
Glossary of building and civil engineering terms. Concrete and plaster. Admixtures |
| BS 6100-6.5:1987 |
Glossary of building and civil engineering terms. Concrete and plaster. Formwork |
| BS 6100-6.6.1:1992 |
Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Concrete and mortar |
| BS 6100-6.6.2:1990 |
Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Plaster |
| BS 6101-1:1981 |
Machine tool ball screws. Methods of calculating dynamic and static load and life ratings |
| BS 6101-2:1991 |
Machine tool ball screws. Specification for accuracy, including geometrical tests |
| BS 6101-3:1992 |
Machine tool ball screws. Glossary of terms |
| BS 6101-4:1987 |
Machine tool ball screws. Method of calculation of static axial rigidity |
| BS 6101-5:1992 |
Machine tool ball screws. Specification for nominal diameters and nominal leads |
| BS 6101-6:1990 |
Machine tool ball screws. Specification for ball nuts and principal dimensions of ball screws |
| BS 6102-1:1981 |
Cycles. Specification for safety requirements for bicycles |
| BS 6102-1:1992 |
Cycles. Specification for safety requirements for bicycles |
| BS 6102-10:1987 |
Cycles. Specification for screw threads used to assemble head fittings on bicycle forks |
| BS 6102-11:1991 |
Cycles. Specification for assembly dimensions for stem and handlebar bend |
| BS 6102-12:1991 |
Cycles. Specification for stem wedge angle |
| BS 6102-13:1991 |
Cycles. Specification for mating dimensions for splined hub and sprocket |
| BS 6102-14:1991 |
Cycles. Specification for dimensions of bottom bracket axle and crank assembly with square end fittings |
| BS 6102-15:1991 |
Cycles. Specification for dimensions of spoke nipples |
| BS 6102-16:1997 |
Cycles. Specification for replacement brake blocks |
| BS 6102-2:1982 |
Cycles. Specification for photometric and physical requirements of reflective devices |
| BS 6102-3:1986 |
Cycles. Specification for photometric and physical requirements of lighting equipment |
| BS 6102-4:1991 |
Cycles. Glossary of terms |
| BS 6102-5:1998 |
Cycles. Specification for bicycle tyre designations and dimensions |
| BS 6102-6:1997 |
Cycles. Specification for bicycle rims |
| BS 6102-8:1990 |
Cycles. Specifications for screw threads used to assemble freewheels on bicycle hubs |
| BS 6102-9:1990 |
Cycles. Specification for screw threads used in bottom bracket assemblies |
| BS 6103:1986 |
Specification for dimensions for the mounting of single-hole, bush-mounted spindle operated electronic components |
| BS 6106:1981 |
Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk |
| BS 6107-3:1992 |
Rolling bearings: tolerances. Specifications for radial internal clearance |
| BS 6109-1:1981 |
Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for tail lifts |
| BS 6109-2:1989 |
Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps |
| BS 6111:1981 |
Specification for reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts |
| BS 611-2:1990 |
Petri dishes. Specification for plastics Petri dishes for single use |
| BS 6113:1981 |
Method for volumetric rating of dumper bodies used for earth-moving |
| BS 6114:1987 |
Method for measurement of volumetric ratings of elevating scrapers used for earth-moving |
| BS 6117:1981 |
Specification for glass bottles for light wine |
| BS 6118:1981 |
Specification for multi-trip glass bottles for beer and cider |
| BS 6119-1:1981 |
Glass bottles for carbonated soft drinks. Specification for 750 ml and 1 litre multi-trip bottles |
| BS 6120:1988 |
Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for alternating current, 2 terminals |
| BS 6121-1:2005 |
Mechanical cable glands. Armour glands. Requirements and test methods |
| BS 6121-5:2005 |
Mechanical cable glands. Code of practice for selection, installation and inspection of cable glands and armour glands |
| BS 6122:1988 |
Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for alternating current, 2 terminals |
| BS 6123:1988 |
Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for alternating current, 2 terminals |
| BS 6127-1:1995 |
Petrographic analysis of bituminous coal and anthracite. Glossary of terms relating to the petrographic analysis of bituminuous coal and anthracite |
| BS 6127-2:1982 |
Petrographic analysis of bituminous coal and anthracite. Method of preparing coal samples for petrographic analysis |
| BS 6127-3:1995 |
Petrographic analysis of bituminous coal and anthracite. Method of determining maceral group composition of bituminous coal and anthracite |
| BS 6127-4:1990 |
Petrographic analysis of bituminous coal and anthracite. Method of determining microlithotype, carbominerite and minerite composition |
| BS 6127-5:1995 |
Petrographic analysis of bituminous coal and anthracite. Method of determining microscopically the reflectance of vitrinite |
| BS 6128-13:1983 |
Industrial laminated rods and tubes based on thermosetting resins. Specification for rectangular moulded tubes |
| BS 6128-4:1981 |
Industrial laminated rods and tubes based on thermosetting resins. Specification for rectangular moulded rods |
| BS 6128-6:1981 |
Industrial laminated rods and tubes based on thermosetting resins. Specification for hexagonal moulded rods |
| BS 6129-1:1981 |
Code of practice for the selection and application of bellows expansion joints for use in pressure systems. Metallic bellows expansion joints |
| BS 613:1977 |
Specification for components and filter units for electromagnetic interference suppression |
| BS 6130-1:1993 |
Hose and hose assemblies for asphalt and bitumen. Specification for flexible metallic hose and hose assemblies |
| BS 6131:1982 |
Glossary of terms relating to household sewing machines |
| BS 6132:1983 |
Code of practice for safe operation of alkaline secondary cells and batteries |
| BS 6133:1995 |
Code of practice for safe operation of lead-acid stationary batteries |
| BS 6134:1991 |
Specification for pressure and vacuum switches |
| BS 6137:1982 |
Specification for electroplated coatings of tin/lead alloys |
| BS 6140-2:1982 |
Test equipment for generating vibration. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration |
| BS 6142:1981 |
Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery |
| BS 6143-1:1992 |
Guide to the economics of quality. Process cost model |
| BS 6143-2:1990 |
Guide to the economics of quality. Prevention, appraisal and failure model |
| BS 6144:1990 |
Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems |
| BS 6147:1989 |
Methods for determination of bulk density of iron ores |
| BS 6148-8:1981 |
Methods of test for commercial refrigerated cabinets. Test for accidental mechanical contact |
| BS 615:1953 |
Specification for Kohlrausch flasks |
| BS 6150:1991 |
Code of practice for painting of buildings |
| BS 6155:1990 |
Specification for tracheal tubes for large animals in veterinary anaesthesia |
| BS 6156:1981 |
Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single |
| BS 6160-1:1989 |
Radio equipment used in mobile services. General requirements and conditions of measurement |
| BS 6160-3:1990 |
Radio equipment used in mobile services. Methods of measurement for receivers for A3E or F3E emissions |
| BS 6160-4:1981 |
Radio equipment used in mobile services. Transmitters employing single-sideband emissions (A3A, A3H or A3J) |
| BS 6160-5:1989 |
Radio equipment used in mobile services. Methods of measurement for receivers employing single-sideband techniques (R3E, H3E or J3E) |
| BS 6160-8:1994 |
Radio equipment used in mobile services. Methods of measurement for antennas |
| BS 6161-11:1985 |
Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of total reflectance using a photoelectric reflectometer |