| Standard |
Official Title of Standard |
|
| BS 7177:1996 |
Specification for resistance to ignition of mattresses, divans and bed bases |
| BS 718:1991 |
Specification for density hydrometers |
| BS 7181:1989 |
Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes |
| BS 7183:1989 |
Guide to design of test rooms for sensory analysis of food |
| BS 7184:2001 |
Selection, use and maintenance of chemical protective clothing. Guidance |
| BS 7188:1998 |
Impact absorbing playground surfacing. Performance requirements and test methods |
| BS 7190:1989 |
Method for assessing thermal performance of low temperature hot water boilers using a test rig |
| BS 7193:1989 |
Specification for lined lightweight rubber overshoes and overboots |
| BS 7194:1990 |
Specification for direct-current and low-frequency electronic measuring instruments with a digital display |
| BS 7195:1989 |
Guide for prevention of corrosion of metals caused by vapours from organic materials |
| BS 7197:1990 |
Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
| BS 7198-1:1989 |
Hydraulic fluid power quick-action couplings. Specification for dimensions and performance |
| BS 7200:1989 |
Specification for synthetic-fibre needlefelts |
| BS 7201-1:1989 |
Hydraulic fluid power. Gas loaded accumulators. Specification for seamless steel accumulator bodies above 0.5 L water capacity |
| BS 7202:1989 |
Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines |
| BS 7206:1990 |
Specification for unvented hot water storage units and packages |
| BS 7207:1990 |
Specification for crude vegetable fats |
| BS 7208-2:1991 |
Contact lenses. Method of classifying contact lens materials |
| BS 7209:1990 |
Specification for water vapour permeable apparel fabrics |
| BS 721-1:1963 |
Specification for worm gearing. Imperial units |
| BS 7211:1998 |
Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS 721-2:1983 |
Specification for worm gearing. Metric units |
| BS 7212:1989 |
Code of practice for safe use of construction hoists |
| BS 7216:1989 |
Classification and interpretation of new lighting products |
| BS 7221:1989 |
Open systems interconnection: specification for internal organization of the Network Layer |
| BS 7225-2.1:1990 |
Classification of refractories. Unshaped refractory products. Alumina, silica and alumino-silicate products |
| BS 7225-2.2:1990 |
Classification of refractories. Unshaped refractory products. Basic products |
| BS 7225-3.1:1990 |
Classification of refractories. Ceramic fibre products. Blankets, mats, felts and paper |
| BS 7227:1990 |
Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards |
| BS 7228-6:1992 |
Industrial robots. Recommendations for safety |
| BS 7230:1989 |
Code of practice for article theft detection systems |
| BS 7231-1:1990 |
Body measurements of boys and girls from birth up to 16.9 years. Information in the form of tables |
| BS 7231-2:1990 |
Body measurements of boys and girls from birth up to 16.9 years. Recommendations of body dimensions for children |
| BS 7236:1989 |
Code of practice for non-reclosable packaging for solid dose units of medicinal products |
| BS 7237:1990 |
Specification for binary floating point arithmetic for microprocessor systems |
| BS 7238:1990 |
Glossary for terminology related to microprocessors |
| BS 7241:1989 |
Specification for IEC 822 VSB: parallel sub-system bus of the IEC 821 VME bus |
| BS 7243-1:1989 |
Refractory raw materials. Method of sampling |
| BS 7244:1990 |
Specification for flame arresters for general use |
| BS 7245:1989 |
Specification for numeric keyboard for home electronic systems (HES) |
| BS 7246:1990 |
Guide for local area networks CSMA/DC 10 M bits/s baseband planning and installation |
| BS 7247:1990 |
Guide for characteristics of local area networks (LAN) |
| BS 7250:1989 |
Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors |
| BS 7251-1:1990 |
Orthopaedic joint prostheses. Specification for general requirements |
| BS 7251-10:1992 |
Orthopaedic joint prostheses. Method of determination of endurance properties of the head and neck region of stemmed femoral components of hip joint prostheses |
| BS 7251-12:1995 |
Orthopaedic joint prostheses. Specification for endurance of stemmed femoral components with application of torsion |
| BS 7251-13:1995 |
Orthopaedic joint prostheses. Method for determination of resistance to torque of head fixation of stemmed femoral components |
| BS 7251-14:1998 |
Orthopaedic joint prostheses. Components for partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials |
| BS 7251-2:1995 |
Orthopaedic joint prostheses. Specification for classification, definitions and designation of dimensions of femoral and tibial components for partial and total knee joint prostheses |
| BS 7251-3:1997 |
Orthopaedic joint prostheses. Specification for classification and designation of dimensions for hip joint prostheses |
| BS 7251-4:1997 |
Orthopaedic joint prostheses. Specification for articulating surfaces made of metallic, ceramic and plastics materials of hip joint prostheses |
| BS 7251-7:1990 |
Orthopaedic joint prostheses. Guide to hip joint simulators |
| BS 7251-8:1990 |
Orthopaedic joint prostheses. Guide to laboratory evaluation of change of form of bearing surfaces of hip joint prostheses |
| BS 7252-1:1997 |
Metallic materials for surgical implants. Specification for wrought stainless steel |
| BS 7252-10:1997 |
Metallic materials for surgical implants. Specification for wrought titanium 5-aluminium 2,5-iron alloy |
| BS 7252-11:1995 |
Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 7-niobium alloy |
| BS 7252-12:1997 |
Metallic materials for surgical implants. Specification for wrought cobalt-chromium-molybdenum alloy |
| BS 7252-13:1997 |
Metallic materials for surgical implants. Specification for unalloyed tantalum for surgical implant applications |
| BS 7252-3:1997 |
Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 4-vanadium alloy |
| BS 7252-4:1997 |
Metallic materials for surgical implants. Specification for cobalt-chromium-molybdenum casting alloy |
| BS 7252-5:1994 |
Metallic materials for surgical implants. Specification for wrought cobalt-chromium-tungsten-nickel alloy |
| BS 7252-6:1997 |
Metallic materials for surgical implants. Specification for wrought cobalt-nickel-chromium-molybdenum alloy |
| BS 7252-7:1994 |
Metallic materials for surgical implants. Specification for cobalt-chromium-nickel-molybdenum-iron alloy |
| BS 7252-8:1997 |
Metallic materials for surgical implants. Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| BS 7252-9:1993 |
Metallic materials for surgical implants. Specification for high-nitrogen stainless steel |
| BS 7253-2:1997 |
Non-metallic materials for surgical implants. Specification for ceramic materials based on high purity alumina |
| BS 7253-3:1990 |
Non-metallic materials for surgical implants. Specification for surgical implants made of heat-vulcanized silicone elastomer |
| BS 7253-6:1997 |
Non-metallic materials for surgical implants. Specification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| BS 7254-2:1990 |
Orthopaedic implants. Specification for general requirements for materials and finish |
| BS 7254-3:1990 |
Orthopaedic implants. Recommendations for care and handling |
| BS 7254-4:1990 |
Orthopaedic implants. Recommendations for retrieval and examination of implants and associated tissues |
| BS 7254-5:1990 |
Orthopaedic implants. Specification for production of castings made of cobalt-chromium-molybdenum alloy |
| BS 7254-6.2:1990 |
Orthopaedic implants. Forgings. Method for specifying forgings |
| BS 7255:2001 |
Code of practice for safe working on lifts |
| BS 7256:1990 |
Specification for roomheaters burning wood logs |
| BS 7258-1:1994 |
Laboratory fume cupboards. Specification for safety and performance |
| BS 7258-2:1994 |
Laboratory fume cupboards. Recommendations for the exchange of information and recommendations for installation |
| BS 7258-3:1994 |
Laboratory fume cupboards. Recommendations for selection, use and maintenance |
| BS 7258-4:1994 |
Laboratory fume cupboards. Method for determination of the containment value of a laboratory fume cupboard |
| BS 7262:1990 |
Specification for automatic safe load indicators |