| Standard |
Official Title of Standard |
|
| BS 799-3:1981 |
Oil burning equipment. Automatic and semi-automatic atomizing burners up to 36 litres per hour |
| BS 799-4:1991 |
Oil burning equipment. Specification for atomizing burners (other than monobloc type) together with associated equipment for single burner and multi burner installations |
| BS 799-5:1987 |
Oil burning equipment. Specification for oil storage tanks |
| BS 799-7:1988 |
Oil burning equipment. Specification for dimensions of atomizing oil burner pumps with rotating shaft and external drive |
| BS 7997:2003 |
Products for tactile paving surface indicators. Specification |
| BS 799-8:1988 |
Oil burning equipment. Specification for connecting dimensions between atomizing oil burners and heat generators |
| BS 7998-3:2002 |
Letter symbols to be used in electrical technology. Logarithmic and related quantities, and their units |
| BS 7F 34:2002 |
Light and medium duty linen (flax) sewing thread for aerospace purposes |
| BS 7F 47:1990 |
Specification for cotton tape for aerospace purposes |
| BS 7F 8:1992 |
Specification for 140 g /m$u2 mercerized cotton fabrics and serrated edge strip for aerospace purposes |
| BS 7L 37:1989 |
Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) |
| BS 7S 1:1964 |
Specification for aircraft material. Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension) |
| BS 7S 80:2002 |
High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm) |
| BS 8000-1:1989 |
Workmanship on building sites. Code of practice for excavation and filling |
| BS 8000-10:1995 |
Workmanship on building sites. Code of practice for plastering and rendering |
| BS 8000-11.1:1989 |
Workmanship on building sites. Code of practice for wall and floor tiling. Ceramic tiles, terrazzo tiles and mosaics |
| BS 8000-11.2:1990 |
Workmanship on building sites. Code of practice for wall and floor tiling. Natural stone tiles |
| BS 8000-12:1989 |
Workmanship on building sites. Code of practice for decorative wallcoverings and painting |
| BS 8000-13:1989 |
Workmanship on building sites. Code of practice for above ground drainage and sanitary appliances |
| BS 8000-14:1989 |
Workmanship on building sites. Code of practice for below ground drainage |
| BS 8000-15:1990 |
Workmanship on building sites. Code of practice for hot and cold water services (domestic scale) |
| BS 8000-16:1997 |
Workmanship on building sites. Code of practice for sealing joints in buildings using sealants |
| BS 8000-2.1:1990 |
Workmanship on building sites. Code of practice for concrete work. Mixing and transporting concrete |
| BS 8000-2.2:1990 |
Workmanship on building sites. Code of practice for concrete work. Sitework with in situ and precast concrete |
| BS 8000-3:2001 |
Workmanship on building sites. Code of practice for masonry |
| BS 8000-4:1989 |
Workmanship on building sites. Code of practice for waterproofing |
| BS 8000-5:1990 |
Workmanship on building sites. Code of practice for carpentry, joinery and general fixings |
| BS 8000-6:1990 |
Workmanship on building sites. Code of practice for slating and tiling of roofs and claddings |
| BS 8000-7:1990 |
Workmanship on building sites. Code of practice for glazing |
| BS 8000-8:1994 |
Workmanship on building sites. Code of practice for plasterboard partitions and dry linings |
| BS 8000-9:2003 |
Workmanship on building sites. Cementitious levelling screeds and wearing screeds. Code of practice |
| BS 8002:1994 |
Code of practice for earth retaining structures |
| BS 8004:1986 |
Code of practice for foundations |
| BS 8006:1995 |
Code of practice for strengthened/reinforced soils and other fills |
| BS 8007:1987 |
Code of practice for design of concrete structures for retaining aqueous liquids |
| BS 8008:1996 |
Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes |
| BS 8010-2.1:1987 |
Code of practice for pipelines. Pipelines on land: design, construction and installation. Ductile iron |
| BS 8010-2.5:1989 |
Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting plastics |
| BS 8020:2002 |
Tools for live working. Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c |
| BS 807:1955 |
Specification for spot welding electrodes |
| BS 8081:1989 |
Code of practice for ground anchorages |
| BS 8100-1:1986 |
Lattice towers and masts. Code of practice for loading |
| BS 8100-1:1986 |
|
| BS 8100-2:1986 |
Lattice towers and masts. Guide to the background and use of Part 1 'Code of practice for loading' |
| BS 8100-3:1999 |
Lattice towers and masts. Code of practice for strength assessment of members of lattice towers and masts |
| BS 8100-4:1995 |
Lattice towers and masts. Code of practice for loading of guyed masts |
| BS 8102:1990 |
Code of practice for protection of structures against water from the ground |
| BS 8103-1:1995 |
Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations and ground floor slabs for housing |
| BS 8103-2:1996 |
Structural design of low-rise buildings. Code of practice for masonry walls for housing |
| BS 8103-2:2005 |
Structural design of low rise buildings. Code of practice for masonry walls for housing |
| BS 8103-3:1996 |
Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing |
| BS 8103-4:1995 |
Structural design of low-rise buildings. Code of practice for suspended concrete floors for housing |
| BS 8104:1992 |
Code of practice for assessing exposure of walls to wind-driven rain |
| BS 811:1950 |
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads) |
| BS 8110-1:1997 |
Structural use of concrete. Code of practice for design and construction |
| BS 8110-2:1985 |
Structural use of concrete. Code of practice for special circumstances |
| BS 8110-3:1985 |
Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns |
| BS 8118-1:1991 |
Structural use of aluminium. Code of practice for design |
| BS 8118-2:1991 |
Structural use of aluminium. Specification for materials, workmanship and protection |
| BS 812-100:1990 |
Testing aggregates. General requirements for apparatus and calibration |
| BS 812-101:1984 |
Testing aggregates. Guide to sampling and testing aggregates |
| BS 812-102:1989 |
Testing aggregates. Methods for sampling |
| BS 812-103.1:1985 |
Testing aggregates. Method for determination of particle size distribution. Sieve tests |
| BS 812-103.2:1989 |
Testing aggregates. Method for determination of particle size distribution. Sedimentation test |
| BS 812-104:1994 |
Testing aggregates. Method for qualitative and quantitative petrographic examination of aggregates |
| BS 812-105.1:1989 |
Testing aggregates. Methods for determination of particle shape. Flakiness index |
| BS 812-105.2:1990 |
Testing aggregates. Methods for determination of particle shape. Elongation index of coarse aggregate |
| BS 812-106:1985 |
Testing aggregates. Method for determination of shell content in coarse aggregate |
| BS 812-109:1990 |
Testing aggregates. Methods for determination of moisture content |
| BS 812-110:1990 |
Testing aggregates. Methods for determination of aggregate crushing value (ACV) |
| BS 812-111:1990 |
Testing aggregates. Methods for determination of ten per cent fines value (TFV) |
| BS 812-112:1990 |
Testing aggregates. Method for determination of aggregate impact value (AIV) |
| BS 812-113:1990 |
Testing aggregates. Method for determination of aggregate abrasion value (AAV) |
| BS 812-114:1989 |
Testing aggregates. Method for determination of the polished-stone value |
| BS 812-117:1988 |
Testing aggregates. Method for determination of water-soluble chloride salts |
| BS 812-118:1988 |
Testing aggregates. Methods for determination of sulphate content |
| BS 812-119:1985 |
Testing aggregates. Method for determination of acid-soluble material in fine aggregate |
| BS 812-120:1989 |
Testing aggregates. Method for testing and classifying drying shrinkage of aggregates in concrete |
| BS 812-121:1989 |
Testing aggregates. Method for determination of soundness |
| BS 812-123:1999 |
Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method |