| Standard No |
Title of Standard |
|
| EN 12325-2:1999 |
Irrigation techniques. Centre pivot and moving lateral systems. Minimum performances and technical characteristics |
| EN 12325-3:1999 |
Irrigation techniques. Centre pivot and moving lateral systems. Terminology and classification |
| EN 12326-1:2004 |
Slate and stone products for discontinuous roofing and cladding. Product specification |
| EN 12326-2:2000 |
Slate and stone products for discontinuous roofing and cladding. Methods of test |
| EN 12327:2000 |
Gas supply systems. Pressure testing, commissioning and decommissioning procedures. Functional requirements |
| EN 12329:2000 |
Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| EN 1233:1997 |
Water quality. Determination of chromium. Atomic absorption spectrometric methods |
| EN 12330:2000 |
Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel |
| EN 123300:1992 |
Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards |
| EN 12332-1:1999 |
Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel ball method |
| EN 12332-2:2002 |
Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method |
| EN 12334:2001 |
Industrial valves. Cast iron check valves |
| EN 12337-1:2000 |
Glass in building. Chemically strengthened soda lime silicate glass. Definition and description |
| EN 12337-2:2004 |
Glass in building. Chemically strengthed soda lime silicate glass. Evaluation of conformity/Product standard |
| EN 12338:1998 |
Water quality. Determination of mercury. Enrichment methods by amalgamation |
| EN 12339:1997 |
Inland navigation vessels. Rope tubs |
| EN 123400:1992 |
Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections |
| EN 123400-800:1992 |
Harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards without through-connections |
| EN 12341:1999 |
Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods |
| EN 12342:1998 |
Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| EN 12346:1999 |
Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods |
| EN 12347:1998 |
Biotechnology. Performance criteria for steam sterilizers and autoclaves |
| EN 12348:2000 |
Core drilling machines on a stand. Safety |
| EN 1235:1995 |
Solid fertilizers. Test sieving |
| EN 123500:1992 |
Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections |
| EN 123500-800:1992 |
Harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards with through-connections |
| EN 12350-1:2000 |
Testing fresh concrete. Sampling |
| EN 12350-2:2000 |
Testing fresh concrete. Slump test |
| EN 12350-3:2000 |
Testing fresh concrete. Vebe test |
| EN 12350-4:2000 |
Testing fresh concrete. Degree of compactability |
| EN 12350-5:2000 |
Testing fresh concrete. Flow table test |
| EN 12350-6:2000 |
Testing fresh concrete. Density |
| EN 12350-7:2000 |
Testing fresh concrete. Air content. Pressure methods |
| EN 12351:1999 |
Industrial valves. Protective caps for valves with flanged connections |
| EN 12352:2000 |
Traffic control equipment. Warning and safety light devices |
| EN 12353:2000 |
Chemical disinfectants and antiseptics. Preservation of microbial strains used for the determination of bactericidal and fungicidal activity |
| EN 12354-1:2000 |
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insulation between rooms |
| EN 12354-2:2000 |
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Impact sound insulation between rooms |
| EN 12354-3:2000 |
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insultation against outdoor sound |
| EN 12354-4:2000 |
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Transmission of indoor sound to the outside |
| EN 12354-6:2003 |
Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Sound absorption in enclosed spaces |
| EN 12355:2003 |
Food processing machinery. Derinding-, skinning- and membrane removal machines. Safety and hygiene requirements |
| EN 1236:1995 |
Fertilizers. Determination of bulk density (loose) |
| EN 123600:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections |
| EN 12365-1:2003 |
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Performance requirements and classification |
| EN 12365-2:2003 |
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Linear compression force test methods |
| EN 12365-3:2003 |
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Deflection recovery test method |
| EN 12365-4:2003 |
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Recovery after accelerated ageing test method |
| EN 12368:2000 |
Traffic control equipment. Signal heads |
| EN 12369-1:2001 |
Wood-based panels. Characteristic values for structural design. OSB, particleboards and fireboards |
| EN 12369-2:2004 |
Wood-based panels. Characteristic values for structural design. Plywood |
| EN 1237:1995 |
Fertilizers. Determination of bulk density (tapped) |
| EN 12370:1999 |
Natural stone test methods. Determination of resistance to salt crystallization |
| EN 123700:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections |
| EN 12371:2001 |
Natural stone test methods. Determination of frost resistance |
| EN 12372:1999 |
Natural stone test methods. Determination of flexural strength under concentrated load |
| EN 12373-1:2001 |
Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| EN 12373-10:1999 |
Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| EN 12373-11:2001 |
Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20$0D, 45$0D, 60$0D, and 85$0D |
| EN 12373-12:2001 |
Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| EN 12373-13:2001 |
Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| EN 12373-14:2001 |
Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method |
| EN 12373-15:2001 |
Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| EN 12373-16:2001 |
Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test |
| EN 12373-17:2001 |
Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential |
| EN 12373-18:2001 |
Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method |
| EN 12373-19:2001 |
Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method |
| EN 12373-2:1999 |
Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method |
| EN 12373-3:1999 |
Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope |
| EN 12373-4:1999 |
Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| EN 12373-5:1999 |
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| EN 12373-6:1999 |
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass |
| EN 12373-7:1999 |
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion |
| EN 12373-8:1999 |
Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| EN 12373-9:1999 |
Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| EN 12374:1998 |
Packaging. Flexible tubes. Terminology |
| EN 12375:1998 |
Packaging. Flexible aluminium tubes. Wall thickness determination method |
| EN 12376:1999 |
In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| EN 12377:1999 |
Packaging. Flexible tubes. Test method for the airtightness of closures |
| EN 1238:1999 |
Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 12380:2002 |
Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity |
| EN 123800:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections |
| EN 12381:2005 |
Health informatics. Time standards for healthcare specific problems |
| EN 12384:1999 |
Copper and copper alloys. Determination of spring bending limit on strip |
| EN 12385-1:2002 |
Steel wire ropes. Safety. General requirements |
| EN 12385-10:2003 |
Steel wire ropes. Safety. Spiral ropes for general applications |
| EN 12385-2:2002 |
Steel wire ropes. Safety. Definitions, designation and classification |
| EN 12385-3:2004 |
Steel wire ropes. Safety. Information for use and maintenance |
| EN 12385-4:2002 |
Steel wire ropes. Safety. Stranded ropes for general lifting applications |
| EN 12385-5:2002 |
Steel wire ropes. Safety. Stranded ropes for lifts |
| EN 12385-6:2004 |
Steel wire ropes. Safety. Stranded ropes for mine shafts |
| EN 12385-7:2002 |
Steel wire ropes. Safety. Locked coil ropes for mine shafts |
| EN 12385-8:2002 |
Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| EN 12385-9:2002 |
Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons |
| EN 12386:1999 |
Chemicals used for treatment of water intended for human consumption. Copper sulfate |
| EN 12387:2005 |
Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements |
| EN 1239:1998 |
Adhesives. Freeze-thaw stability |
| EN 12390-1:2000 |
Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds |
| EN 12390-2:2000 |
Testing hardened concrete. Making and curing specimens for strength tests |
| EN 12390-3:2002 |
Testing hardened concrete. Compressive strength of test specimens |
| EN 12390-4:2000 |
Testing hardened concrete. Compressive strength. Specification for testing machines |
| EN 12390-5:2000 |
Testing hardened concrete. Flexural strength of test specimens |
| EN 12390-6:2000 |
Testing hardened concrete. Tensile splitting strength of test specimens |
| EN 12390-7:2000 |
Testing hardened concrete. Density of hardened concrete |
| EN 12390-8:2000 |
Testing hardened concrete. Depth of penetration of water under pressure |
| EN 12391-1:2003 |
Chimneys. Execution standard for metal chimneys. Chimneys for non-roomsealed heating appliances |
| EN 12392:2000 |
Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment |
| EN 12393-1:1999 |
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations |
| EN 12393-2:1999 |
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up |
| EN 12393-3:1999 |
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests |
| EN 12396-1:1999 |
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Spectrometric method |
| EN 12396-2:1999 |
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Gas chromatographic method |
| EN 12396-3:2000 |
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. UV spectrometric xanthogenate method |
| EN 12397:2004 |
Safety requirements for Cableway installations designed to carry persons. Operation |
| EN 124:1994 |
Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control |