Standard No |
Title of Standard |
|
EN 12563:1999 |
Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants |
EN 12564:1999 |
Non-active surgical implants. Joint replacement implants. Specific requirements for knee joint replacement implants |
EN 12566-1:2000 |
Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks |
EN 12567:2000 |
Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests |
EN 12568:1998 |
Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts |
EN 12569:1999 |
Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests |
EN 12570:2000 |
Industrial valves. Method for sizing the operating element |
EN 12571:1999 |
Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing |
EN 12572:1999 |
Artificial climbing structures. Protection points, stability requirements and test methods |
EN 12573-1:2000 |
Welded static non-pressurized thermoplastic tanks. General principles |
EN 12573-2:2000 |
Welded static non-pressurized thermoplastic tanks. Calculation of vertical cylindrical tanks |
EN 12573-3:2000 |
Welded static non-pressurized thermoplastic tanks. Design and calculation for single skin rectangular tanks |
EN 12573-4:2000 |
Welded static non-pressurized thermoplastic tanks. Design and calculation of flanged joints |
EN 12574-1:2002 |
Stationary waste containers. Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices. Dimensions and design |
EN 12574-2:2002 |
Stationary waste containers. Performance requirements and test methods |
EN 12574-3:2002 |
Stationary waste containers. Safety and health requirements |
EN 12575:1998 |
Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC |
EN 12576:1998 |
Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC |
EN 12579:2000 |
Soil improvers and growing media. Sampling |
EN 12580:2000 |
Soil improvers and growing media. Determination of a quantity |
EN 12582:1999 |
Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD |
EN 12583:2000 |
Gas supply systems. Compressor stations. Functional requirements |
EN 12584:1999 |
Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology |
EN 12585:1999 |
Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000. Compatibility and interchangeability |
EN 12586:1999 |
Child care articles. Soother holder. Safety requirements and test methods |
EN 12588:1999 |
Lead and lead alloys. Rolled lead sheet for building purposes |
EN 12589:2001 |
Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units |
EN 12590:2000 |
Textiles. Industrial sewing threads made wholly or partly form synthetic fibres |
EN 12591:2000 |
Bitumen and bituminous binders. Specifications for paving grade bitumens |
EN 12592:2000 |
Methods of test for petroleum and its products. BS 2000-47. Bitumen and bituminous binders. Determination of solubility |
EN 12593:2000 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the Fraass breaking point |
EN 12594:2000 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples |
EN 12595:2000 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of kinematic viscosity |
EN 12596:2000 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary |
EN 12597:2000 |
Bitumen and bituminous binders. Terminology |
EN 12599:2000 |
Ventilation for buildings. Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems |
EN 126:2004 |
Multifunctional controls for gas burning appliances |
EN 12600:2002 |
Glass in building. Pendulum test. Impact test method and classification for flat glass |
EN 12601:2001 |
Reciprocating internal combustion engine driven generating sets. Safety |
EN 12603:2002 |
Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
EN 12604:2000 |
Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements |
EN 12605:2000 |
Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods |
EN 12606-1:2000 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation |
EN 12606-2:2000 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by extraction |
EN 12607-1:2000 |
Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RTFOT method |
EN 12607-2:2000 |
Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. TFOT Method |
EN 12607-3:2000 |
Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RFT Method |
EN 12608:2003 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods |
EN 1261:1995 |
Fibre ropes for general service. Hemp |
EN 12613:2001 |
Plastic warning devices for underground cables and pipelines with visual characteristics |
EN 12614:2004 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of glass transition temperatures of polymers |
EN 12615:1999 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength |
EN 12616:2003 |
Surfaces for sports areas. Determination of water infiltration rate |
EN 12617-1:2003 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of linear shrinkage for polymers and surface protection systems (SPS) |
EN 12617-3:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of early age linear shrinkage for structural bonding agents |
EN 12617-4:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion |
EN 12618-1:2003 |
Products and systems for the protection and repair of concrete structures. Test methods. Adhesion and elongation capacity of injection products with limited ductility |
EN 12618-3:2004 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. |
EN 12619:1999 |
Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method |
EN 1262:2003 |
Surface active agents. Determination of pH value of solutions or dispersions |
EN 12620:2002 |
Aggregates for concrete |
EN 12622:2001 |
Safety of machine tools. Hydraulic press brakes |
EN 12625-3:1999 |
Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density |
EN 12625-4:1999 |
Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption |
EN 12625-5:1999 |
Tissue paper and tissue products. Determination of wet tensile strength |
EN 12625-7:2000 |
Tissue paper and tissue products. Determination of optical properties |
EN 12627:1999 |
Industrial valves. Butt welding ends for steel valves |
EN 12628:1999 |
Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods |
EN 12629-1:2001 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements |
EN 12629-2:2002 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines |
EN 12629-3:2002 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Slide and turntable machines |
EN 12629-4:2001 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete and tile making machines |
EN 12629-5.4:2003 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete pipe coating machines |
EN 12629-5-1:2003 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the vertical axis |
EN 12629-5-2:2003 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the horizontal axis |
EN 12629-5-3:2003 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe prestressing machines |
EN 12629-7:2004 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for long line manufacture of prestressed products |
EN 12629-8:2002 |
Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. |
EN 12630:1999 |
Fruit and vegetable juices. Determination of glucose, fructose, sorbitol and sucrose contents. Method using high-performance liquid chromatography |
EN 12631:1999 |
Fruit and vegetable juices. Enzymatic determination of D- and L-lactic acid (lactate) content. NAD spectrometric method |
EN 1263-1:2002 |
Safety nets. Safety requirements, test methods |
EN 12632:1999 |
Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method |
EN 1263-2:2002 |
Safety nets. Safety requirements for the positioning limits |
EN 12634:1998 |
Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method |
EN 12635:2002 |
Industrial, commercial and garage doors and gates. Installation and use |
EN 12636:1999 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete |
EN 12637-1:2004 |
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Compatibility with concrete |
EN 12637-3:2003 |
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Effect of injection products on elastomers |
EN 12639:2000 |
Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy |
EN 12640:2001 |
Securing of cargo on road vehicles. Lashing points on commercial vehicles for goods transportation. Minimum requirements and testing |
EN 1264-1:1998 |
Floor heating. Systems and components. Definitions and symbols |
EN 12641-1:2000 |
Swap bodies. Tarpaulins. Minimum requirements |
EN 1264-2:1998 |
Floor heating. Systems and components. Determination of the thermal output |
EN 12642:2001 |
Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements |
EN 12643:1998 |
Earth-moving machinery. Rubber-tyred machines. Steering requirements |
EN 1264-3:1998 |
Floor heating. Systems and components. Floor heating. Systems and components. Dimensioning |
EN 1264-4:2001 |
Floor heating. Systems and components. Installation |
EN 12644-1:2001 |
Cranes. Information for use and testing. Instructions |
EN 12644-2:2000 |
Cranes. Information for use and testing. Marking |
EN 12645:1999 |
Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing |
EN 1265:1999 |
Noise test code for foundry machines and equipment |
EN 12653:2000 |
Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements |
EN 12654-1:1999 |
Textile glass. Yarns. Designation |
EN 12654-2:1999 |
Textile glass. Yarns. Methods of test and general specifications |
EN 12654-3:1999 |
Textile glass. Yarns. General requirements for general applications |
EN 12655:1998 |
Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods |
EN 12659:1999 |
Lead and lead alloys. Lead |
EN 1266:2002 |
Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases |
EN 12662:1998 |
Methods of test for petroleum and its products. Liquid petroleum products. Determination of contamination in middle distillates |
EN 12663:2000 |
Railway applications. Structural requirements of railway vehicle bodies |
EN 12664:2001 |
Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. |
EN 12665:2002 |
Light and lighting. Basic terms and criteria for specifying lighting requirements |
EN 12667:2001 |
Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. |
EN 12668-1:2000 |
Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments |
EN 12668-2:2001 |
Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Probes |