| Standard No |
Title of Standard |
|
| EN 12668-3:2000 |
Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment |
| EN 12669:2000 |
Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| EN 1267:1999 |
Valves. Test of flow resistance using water as a test fluid |
| EN 12670:2002 |
Natural stone. Terminology |
| EN 12671:2000 |
Chemicals used for treatment of water intended for human consumption. Chlorine dioxide |
| EN 12672:2000 |
Chemicals used for treatment of water intended for human consumption. Potassium permanganate |
| EN 12673:1999 |
Water quality. Gas chromatographic determination of some selected chlorophenols in water |
| EN 12674-1:1999 |
Roll containers. Terminology |
| EN 12674-2:2002 |
Roll containers. General design and safety principles |
| EN 12675:2001 |
Traffic signal controllers. Functional safety requirements |
| EN 12676-1:2000 |
Anti-glare systems for roads. Performance and characteristics |
| EN 12676-2:2000 |
Anti-glare systems for roads. Test methods |
| EN 12678:2000 |
Chemicals used for treatment of water intended for human consumption. Potassium peroxomonosulfate |
| EN 12679:2000 |
Non-destructive testing. Determination of the size of industrial radiographic sources. Radiographic method |
| EN 12680-1:2003 |
Founding. Ultrasonic examination. Steel castings for general purposes |
| EN 12680-2:2003 |
Founding. Ultrasonic examination. Steel castings for highly stressed components |
| EN 12680-3:2003 |
Founding. Ultrasonic examination. Spheroidal graphite cast iron castings |
| EN 12681:2003 |
Founding. Radiographic examination |
| EN 12682:1998 |
Biotechnology. Modified organisms for application in the environment. Guidance for the characterization |
| EN 12683:1998 |
Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism |
| EN 12685:1998 |
Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate release of genetically modified micro-organisms |
| EN 12686:1998 |
Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified micro-organisms |
| EN 12687:1998 |
Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the genomic modification |
| EN 12689:1998 |
Biotechnology. Guidance on assessment of the purity, biological activity and stability of micro-organism based products |
| EN 1269:1997 |
Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test |
| EN 12690:1999 |
Biotechnology. Performance criteria for shaft seals |
| EN 12691:2001 |
Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact |
| EN 12696:2000 |
Cathodic protection of steel in concrete |
| EN 12697-1:2000 |
Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content |
| EN 12697-10:2002 |
Bituminous mixtures. Test methods for hot mix asphalt. Compactibility |
| EN 12697-11:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the compatibility between aggregate and bitumen |
| EN 12697-12:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens |
| EN 12697-13:2000 |
Bituminous mixtures. Test methods for hot mix asphalt. Temperature measurement |
| EN 12697-14:2000 |
Bituminous mixtures. Test methods for hot mix asphalt. Water content |
| EN 12697-15:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the segregation sensitivity |
| EN 12697-16:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Abrasion by studded tyres |
| EN 12697-17:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Particle loss of porous asphalt specimen |
| EN 12697-18:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Binder drainage |
| EN 12697-19:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen |
| EN 12697-2:2002 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of particle size distribution |
| EN 12697-20:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or Marshall specimens |
| EN 12697-21:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens |
| EN 12697-22:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Wheel tracking |
| EN 12697-23:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the indirect tensile strength of bituminous specimens |
| EN 12697-24:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue |
| EN 12697-25:2005 |
Bituminous mixtures. Test methods for hot mix asphalt. Cyclic compression test |
| EN 12697-26:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Stiffness |
| EN 12697-27:2001 |
Bituminous mixtures. Test methods for hot mix asphalt. Sampling |
| EN 12697-28:2001 |
Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading |
| EN 12697-29:2002 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the dimensions of a bituminous specimen |
| EN 12697-3:2005 |
Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Rotary evaporator |
| EN 12697-30:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor |
| EN 12697-31:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation gyratory compactor |
| EN 12697-32:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Laboratory compaction of bituminous mixtures by vibratory compactor |
| EN 12697-33:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Specimen prepared by roller compactor |
| EN 12697-34:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Marshall test |
| EN 12697-35:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Laboratory mixing |
| EN 12697-36:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the thickness of a bituminous pavement |
| EN 12697-37:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Hot sand test for the adhesivity of binder on precoated chippings for HRA |
| EN 12697-38:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Test equipment and calibration |
| EN 12697-39:2004 |
Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition |
| EN 12697-4:2005 |
Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Fractionating column |
| EN 12697-5:2002 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density |
| EN 12697-6:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens |
| EN 12697-7:2002 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the bulk density of bituminous specimens by gamma rays |
| EN 12697-8:2003 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of void characteristics of bituminous specimens |
| EN 12697-9:2002 |
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the reference density |
| EN 12699:2001 |
Execution of special geotechnical work. Displacement piles |
| EN 1270:1998 |
Playing field equipment. Basketball equipment. Functional and safety requirements, test methods |
| EN 12701:2001 |
Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials |
| EN 12702:2000 |
Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers |
| EN 12703:1999 |
Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature |
| EN 12704:2000 |
Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives |
| EN 12705:2000 |
Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
| EN 12706:2000 |
Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics |
| EN 12707:2000 |
Plastic drums. Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l |
| EN 12708:2000 |
Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l |
| EN 12709:2000 |
Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l |
| EN 1271:2004 |
Playing field equipment. Volleyball equipment. Functional and safety requirements, test methods |
| EN 12710:2000 |
Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l |
| EN 12711:2000 |
Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l |
| EN 12712:2000 |
Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm |
| EN 12713:2000 |
Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L |
| EN 12714:2000 |
Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 L |
| EN 12715:2000 |
Execution of special geotechnical work. Grouting |
| EN 12716:2001 |
Execution of special geotechnical works. Jet grouting |
| EN 12717:2001 |
Safety of machine tools. Drilling machines |
| EN 1272:1998 |
Child care articles. Table mounted chairs. Safety requirements and test methods |
| EN 12720:1997 |
Furniture. Assessment of surface resistance to cold liquids |
| EN 12721:1997 |
Furniture. Assessment of surface resistance to wet heat |
| EN 12722:1997 |
Furniture. Assessment of surface resistance to dry heat |
| EN 12723:2000 |
Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units |
| EN 12726:2000 |
Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules |
| EN 12727:2000 |
Furniture. Ranked seating. Test methods and requirements for strength and durability |
| EN 12728:2000 |
Surface active agents. Determination of foaming power. Perforated disc beating method |
| EN 12729:2002 |
Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A |
| EN 1273:2005 |
Child use and care articles. Baby walking frames. Safety requirements and test methods |
| EN 12730:2001 |
Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading |
| EN 12732:2000 |
Gas supply systems. Welding steel pipework. Functional requirements |
| EN 12733:2001 |
Agricultural and forestry machinery. Pedestrian controlled motor mowers. Safety |
| EN 12734:2000 |
Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing |
| EN 12735-1:2001 |
Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems |
| EN 12735-2:2001 |
Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment |
| EN 12736:2001 |
Electrically propelled road vehicles. Airborne acoustical noise of vehicle during charging with on-board chargers. Determination of sound power level |
| EN 12737:2004 |
Precast Concrete Products. Floor Slats for Livestock |
| EN 12738:1999 |
Biotechnology. Laboratories for research, development and analysis. Guidance for containment of animals inoculated with microorganisms in experiments |
| EN 1274:2004 |
Thermal spraying. Powders. Composition, technical supply conditions |
| EN 12740:1999 |
Biotechnology. Laboratories for research, development and analysis. Guidance for handling, inactivating and testing of waste |
| EN 12741:1999 |
Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations |
| EN 12742:1999 |
Fruit and vegetable juices. Determination of free amino acids content. Liquid chromatographic method |
| EN 12743:1999 |
Footwear. Test methods for outsoles. Compression energy |
| EN 12744:1999 |
Footwear. Test methods for insoles. Delamination resistance |
| EN 12745:1999 |
Footwear. Test methods for insoles. Pin holding strength |
| EN 12746:2000 |
Footwear. Test methods for insoles and insocks. Water absorption and desorption |
| EN 12747:1999 |
Footwear. Test methods for insoles. Abrasion resistance |