| Standard No |
Title of Standard |
|
| EN 13279-2:2004 |
Gypsum binders and gypsum plasters. Test methods |
| EN 1328:1997 |
Cement bonded particleboards. Determination of frost resistance |
| EN 13280:2001 |
Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
| EN 13281:2000 |
Inland navigation vessels. Safety requirements for walkways and working places |
| EN 13283:2002 |
Zinc and zinc alloys. Secondary zinc |
| EN 13284-1:2002 |
Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method |
| EN 13284-2:2004 |
Stationary source emissions. Determination of low range mass concentration of dust. Automated measuring systems |
| EN 13285:2003 |
Unbound mixtures. Specifications |
| EN 13286-1:2003 |
Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
| EN 13286-2:2004 |
Unbound and hydraulically bound mixtures. Test methods for the determination of the laboratory reference density and water content. Proctor compaction |
| EN 13286-3:2003 |
Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrocompression with controlled parameters |
| EN 13286-4:2003 |
Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrating hammer |
| EN 13286-40:2003 |
Unbound and hydraulically bound mixtures. Test method for determination of the direct tensile strength of hydraulically bound mixtures |
| EN 13286-41:2003 |
Unbound and hydraulically bound mixtures. Test method for determination of the compressive strength of hydraulically bound mixtures |
| EN 13286-42:2003 |
Unbound and hydraulically bound mixtures. Test method for the determination of the indirect tensile strength of hydraulically bound mixtures |
| EN 13286-43:2003 |
Unbound and hydraulically bound mixtures. Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
| EN 13286-44:2003 |
Unbound and hydraulically bound mixtures. Test method for the determination of the alpha coefficient of vitrified blast furnace slag |
| EN 13286-45:2003 |
Unbound and hydraulically bound mixtures. Test method for the determination of the workability period of hydraulically bound mixtures |
| EN 13286-46:2003 |
Unbound and hydraulically bound mixtures. Test method for the determination of the moisture condition value |
| EN 13286-47:2004 |
Unbound and hydraulically bound mixtures. Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
| EN 13286-49:2004 |
Unbound and hydraulically bound mixtures. Accelerated swelling test for soil treated by lime and/or hydraulic binder |
| EN 13286-5:2003 |
Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrating table |
| EN 13286-50:2004 |
Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction |
| EN 13286-51:2004 |
Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
| EN 13286-52:2004 |
Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression |
| EN 13286-53:2004 |
Unbound and hydraulically bound mixtures. Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression |
| EN 13286-7:2004 |
Unbound and hydraulically bound mixtures. Cyclic load triaxial test for unbound mixtures |
| EN 13287:2004 |
Safety, protective and occupational footwear for professional use. Test method for slip resistance |
| EN 13289:2001 |
Pasta processing plants. Dryers and coolers. Safety and hygiene requirements |
| EN 13290-1:1999 |
Space project management. General requirements. Policy and principles |
| EN 13290-2:2001 |
Space project management. General requirements. Project breakdown structure |
| EN 13290-3:2001 |
Space project management. General requirements. Project organisation |
| EN 13290-4:2001 |
Space project management. General requirements. Project phasing and planning |
| EN 13290-5:2001 |
Space project management. General requirements. Configuration management |
| EN 13290-6:2001 |
Space project management. General requirements. Information/documentation management |
| EN 13290-7:2001 |
Space project management. General requirements. Cost and schedule management |
| EN 1329-1:2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). |
| EN 13291-1:1999 |
Space products assurance. General requirements. Policy and principles |
| EN 13291-2:2003 |
Space product assurance. General requirements. Quality assurance |
| EN 13291-3:2003 |
Space products assurance. General requirements. Materials, mechanical parts and processes |
| EN 13292:1999 |
Space engineering standards. Policy and principles |
| EN 13293:2002 |
Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity |
| EN 13294:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time |
| EN 13295:2004 |
Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation |
| EN 13297:2000 |
Textile floor coverings. Classification of needled pile floor coverings |
| EN 13298:2003 |
Railway applications. Suspension components. Helical suspension springs, steel |
| EN 13299:2000 |
Fertilizers. Determination of flow rate |
| EN 133:2001 |
Respiratory protective devices. Classification |
| EN 13300:2001 |
Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification |
| EN 133000:1997 |
Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression |
| EN 1330-1:1998 |
Non-destructive testing. Terminology. List of general terms |
| EN 13301:2003 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of staining tendency of bitumens |
| EN 1330-10:2003 |
Non-destructive testing. Terminology. Terms used in visual testing |
| EN 1330-2:1998 |
Non-destructive testing. Terminology. Terms common to the non-destructive testing methods |
| EN 13302:2003 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of viscosity of bitumen using a rotating spindle apparatus |
| EN 1330-3:1997 |
Non-destructive testing. Terminology. Terms used in industrial radiographic testing |
| EN 13303:2003 |
Methods of test for petroleum and its products. BS 2000-506. Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumens |
| EN 1330-4:2000 |
Non-destructive testing. Terminology. Terms used in ultrasonic testing |
| EN 13304:2003 |
Bitumen and bituminous binders. Framework for specification of oxidised bitumens |
| EN 1330-5:1998 |
Non-destructive testing. Terminology. Terms used in eddy current testing |
| EN 13305:2003 |
Bitumen and bituminous binders. Framework of specification of hard industrial bitumens |
| EN 13306:2001 |
Maintenance terminology |
| EN 1330-7:2005 |
Non-destructive testing. Terminology. Terms used in magnetic particle testing |
| EN 1330-8:1998 |
Non-destructive testing. Terminology. Terms used in leak tightness testing |
| EN 13308:2002 |
Tanks for transport of dangerous goods. Service equipment for tanks. Non pressure balanced footvalve |
| EN 13309:2000 |
Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply |
| EN 1330-9:2000 |
Non-destructive testing. Terminology. Terms used in acoustic emission testing |
| EN 13310:2003 |
Kitchen sinks. Functional requirements and test methods |
| EN 133100:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. |
| EN 133101:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. |
| EN 13311-1:2001 |
Biotechnology. Performance criteria for vessels. General performance criteria |
| EN 13311-2:2001 |
Biotechnology. Performance criteria for vessels. Pressure protection devices |
| EN 13311-3:2001 |
Biotechnology. Performance criteria for vessels. Glass pressure vessels |
| EN 13311-4:2001 |
Biotechnology. Performance criteria for vessels. Bioreactors |
| EN 13311-5:2001 |
Biotechnology. Performance criteria for vessels. Kill tanks |
| EN 13311-6:2001 |
Biotechnology. Performance criteria for vessels. Chromatography columns |
| EN 13312-1:2001 |
Biotechnology. Performance criteria for piping and instrumentation. General performance criteria |
| EN 13312-2:2001 |
Biotechnology. Performance criteria for piping and instrumentation. Couplings |
| EN 13312-3:2001 |
Biotechnology. Performance criteria for piping and instrumentation. Sampling and inoculation devices |
| EN 13312-4:2001 |
Biotechnology. Performance criteria for piping and instrumentation. Tubes and pipes |
| EN 13312-5:2001 |
Biotechnology. Performance criteria for piping and instrumentation. Valves |
| EN 13312-6:2001 |
Biotechnology. Performance criteria for piping and instrumentation. Equipment probes |
| EN 13313:2001 |
Refrigerating systems and heat pumps. Competence of personnel |
| EN 13314:2002 |
Tanks for transport of dangerous goods. Service equipment for tanks. Fill hole cover |
| EN 13315:2002 |
Tanks for transport of dangerous goods. Service equipment for tanks. Gravity discharge coupler |
| EN 13316:2002 |
Tanks for transport of dangerous goods. Service equipment for tanks. Pressure balanced footvalve |
| EN 13317:2002 |
Tanks for transport of dangerous goods. Service equipment for tanks. Manhole cover assembly |
| EN 13318:2000 |
Screed material and floor screeds. Definitions |
| EN 13319:2000 |
Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods |
| EN 13320:2002 |
Surface active agents. Gas chromatographic trace determination of free ethylene oxide in ethoxylates |
| EN 133200:1999 |
Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression |
| EN 133201:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. |
| EN 1332-1:1999 |
Identification card systems. Man-machine interface. Design principles for the user interface |
| EN 1332-2:1998 |
Identification card systems. Man-machine interface. Dimensions and location of a tactile identifier for ID-1 cards |
| EN 133221:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. |
| EN 13322-1:2003 |
Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel |
| EN 13322-2:2003 |
Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Stainless steel |
| EN 1332-3:1999 |
Identification card systems. Man-machine interface. Key pads |
| EN 1332-4:1999 |
Identification card systems. Man-machine interface. Coding of user requirements for people with special needs |
| EN 13328-1:2001 |
Breathing system filters for anaesthetic and respiratory use. Salt test method to assess filtration performance |
| EN 13328-2:2002 |
Breathing system filters for anaesthetic and respiratory use. Non-filtration aspects |
| EN 13329:2000 |
Laminate floor coverings. Specifications, requirements and test methods |
| EN 1333:1997 |
Pipework components. Definition and selection of PN |
| EN 13330:2002 |
Shutters. Hard body impact. Test method |
| EN 13331-1:2002 |
Trench lining systems. Product specifications |
| EN 13331-2:2002 |
Trench lining systems. Assessment by calculation or test |
| EN 13335:2002 |
Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method |
| EN 13336:2004 |
Leather. Upholstery leather characteristics. Guide for selection of leather for furniture |
| EN 1334:1996 |
Domestic furniture. Beds and mattresses. Methods of measurement and recommended tolerances |
| EN 13341:2005 |
Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 |
| EN 13342:2000 |
Characterization of sludges. Determination of Kjeldahl nitrogen |
| EN 13346:2000 |
Characterization of sludges. Determination of trace elements and phosphorous. Aqua regia extraction methods |
| EN 13347:2002 |
Copper and copper alloys. Rod and wire for welding and braze welding |
| EN 13348:2001 |
Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum |
| EN 13349:2002 |
Copper and copper alloys. Pre-insulated copper tubes with solid covering |