| Standard No |
Title of Standard |
|
| EN 167:2002 |
Personal eye protection. Optical test methods |
| EN 1670:1998 |
Building hardware. Corrosion resistance. Requirements and test methods |
| EN 1671:1997 |
Pressure sewerage systems outside buildings |
| EN 1672-2:2005 |
Food processing machinery. Basic concepts. Hygiene requirements |
| EN 1673:2000 |
Food processing machinery. Rotary rack ovens. Safety and hygiene requirements |
| EN 1674:2000 |
Food processing machinery. Dough and pastry brakes. Safety and hygiene requirements |
| EN 1676:1997 |
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications |
| EN 1677-1:2000 |
Components for slings. Safety. Forged steel components, Grade 8 |
| EN 1677-2:2000 |
Components for slings. Safety. Forged steel lifting hooks with latch, Grade 8 |
| EN 1677-3:2001 |
Components for slings. Safety. Forged steel self-locking hooks. Grade 8 |
| EN 1677-4:2000 |
Components for slings. Safety. Links, Grade 8 |
| EN 1677-5:2001 |
Components for slings. Safety. Forged steel lifting hooks with latch. Grade 4 |
| EN 1677-6:2001 |
Components for slings. Safety. Links. Grade 4 |
| EN 1678:1998 |
Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements |
| EN 1679-1:1998 |
Reciprocating internal combustion engines. Safety. Compression ignition engines |
| EN 168:2002 |
Personal eye-protection. Non-optical test methods |
| EN 1680:1997 |
Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism |
| EN 168100:1995 |
Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval) |
| EN 168101:1997 |
Harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal units (capability approval) |
| EN 168200:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (qualification approval) |
| EN 168201:1996 |
Harmonized system of quality assessment for electronic components. Blank detail specification. Quartz crystal units. (Qualification approval) |
| EN 169:2002 |
Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended use |
| EN 169000:1993 |
Harmonized system of quality assessment for electronic components. Generic specification. Quartz crystal controlled oscillators |
| EN 169100:1993 |
Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal controlled oscillators (capability approval) |
| EN 169101:1995 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal controlled oscillators (capability approval) |
| EN 170:2002 |
Personal eye-protection. Ultraviolet filters.Transmittance requirements and recommended use |
| EN 170000:1999 |
Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators |
| EN 170100:2001 |
Harmonized system of quality assessment for electronic components. Sectional specification: Waveguide type dielectric resonators |
| EN 170101:2001 |
Harmonized system of quality assessment for electronic components. Blank detail specification. Waveguide type dielectric resonators. Capability approval |
| EN 1704:1997 |
Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending |
| EN 1705:1997 |
Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow |
| EN 1706:1998 |
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
| EN 1707:1997 |
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment. Lock fittings |
| EN 1708-1:1999 |
Welding. Basic weld joint details in steel. Pressurized components |
| EN 1708-2:2000 |
Welding. Basic weld joint details in steel. Non-internal pressurized components |
| EN 1709:2004 |
Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks |
| EN 171:2002 |
Personal eye-protection. Infrared filters. Transmittance requirements and recommended use |
| EN 171000:2001 |
Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators |
| EN 1711:2000 |
Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis |
| EN 1712:1997 |
Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels |
| EN 1713:1998 |
Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds |
| EN 1714:1998 |
Non destructive testing of welded joints. Ultrasonic testing of welded joints |
| EN 1715-1:1998 |
Aluminium and aluminium alloys. Drawing stock. General requirements and technical conditions for inspection and delivery |
| EN 1715-2:1998 |
Aluminium and aluminium alloys. Drawing stock. Specific requirements for electrical applications |
| EN 1715-3:1998 |
Aluminium and aluminium alloys. Drawing stock. Specific requirements for mechanical uses (excluding welding) |
| EN 1715-4:1998 |
Aluminium and aluminium alloys. Drawing stock. Specific requirements for welding applications |
| EN 1716:1997 |
Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee |
| EN 1717:2001 |
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN 1718:1999 |
Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt |
| EN 1719:1999 |
Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure-sensitive adhesives. Determination of loop tack |
| EN 172:1995 |
Specification for sunglare filters used in personal eye-protectors for industrial use |
| EN 1720:1999 |
Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability |
| EN 1721:1999 |
Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack |
| EN 1722:1999 |
Light conveyor belts. Test method for the determination of the maximum tensile strength |
| EN 1723:2000 |
Light conveyor belts. Method of test for the determination of the relaxed elastic modulus |
| EN 1724:1999 |
Light conveyor belts. Test method for the determination of the coefficient of friction |
| EN 1725:1998 |
Domestic furniture. Beds and mattresses. Safety requirements and test methods |
| EN 1726-1:1999 |
Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements |
| EN 1726-2:2000 |
Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. |
| EN 1727:1998 |
Domestic furniture. Storage furniture. Safety requirements and test methods |
| EN 1728:2001 |
Domestic furniture. Seating. Test methods for the determination of strength and durability |
| EN 1730:2000 |
Domestic furniture. Tables. Test methods for determination of strength, durability and stability |
| EN 1731:1998 |
Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat |
| EN 1733:2002 |
Suction catheters for use in the respiratory tract |
| EN 1734:1997 |
Rubber- or plastics- coated fabrics. Determination of resistance to water penetration. Low-pressure method |
| EN 1735:1997 |
Rubber- or plastics- coated fabrics. Determination of flexibility |
| EN 1736:2000 |
Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators and expansion joints. Requirements, design and installation |
| EN 1737:1998 |
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete |
| EN 1738:1998 |
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete |
| EN 1739:1998 |
Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 174:2001 |
Personal eye-protection. Ski goggles for downhill skiing |
| EN 1740:1998 |
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load |
| EN 1741:1998 |
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1742:1998 |
Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1744-1:1998 |
Tests for chemical properties of aggregates. Chemical analysis |
| EN 1744-3:2002 |
Tests for chemical properties of aggregates. Preparation of eluates by leaching of aggregates |
| EN 1745:2002 |
Masonry and masonry products. Methods for determining design thermal values |
| EN 1746:1999 |
Safety of machinery. Guidance for the drafting of the noise clauses of safety standards |
| EN 1748-1-1:2004 |
Glass in building. Special basic products. Borosilicate glasses |
| EN 1748-1-2:2004 |
Glass in building. Special basic products. Borosilicate glasses |
| EN 1748-2-1:2004 |
Glass in building. Special basic products. Glass ceramics |
| EN 1748-2-2:2004 |
Glass in building. Special basic products. Glass ceramics |
| EN 175:1997 |
Personal protection. Equipment for eye and face protection during welding and allied processes |
| EN 1751:1999 |
Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves |
| EN 175100:1993 |
Harmonized system of quality assessment for electronic components. Sectional specification. Two part and edge socket connectors for printed board applications |
| EN 175101-802:2000 |
Harmonized system of quality assessment for electronic components. Detail specification. |
| EN 175101-809:2004 |
Harmonized system of quality assessment for electronic components. Detail specification. |
| EN 175200:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification: circular connectors |
| EN 175201-804:2000 |
Harmonized system of quality assessment for electronic components. Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling |
| EN 1753:1997 |
Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
| EN 175300:1992 |
Harmonized system of quality assessment for electronic components. Sectional specification: rectangular connectors for frequencies below 3 MHz |
| EN 175300:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification:rectangular connectors for frequencies below 3 MHz |
| EN 175301-801:2000 |
Harmonized system of quality assessment for electronic components. Detail specification. High density rectangular connectors, round removable crimp contacts |
| EN 175301-803:2000 |
Harmonized system of quality assessment for electronic components. Detail specification. Rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
| EN 1754:1997 |
Magnesium and magnesium alloys. Magnesium and magnesium alloy anodes, ingots and castings. Designation system |
| EN 1755:2000 |
Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust |
| EN 175500:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
| EN 1756-1:2001 |
Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Tail lifts for goods |
| EN 1756-2:2004 |
Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Tail lifts for passengers |
| EN 1757-1:2001 |
Safety of industrial trucks. Pedestrian propelled trucks. Stacker trucks |
| EN 1757-2:2001 |
Safety of industrial trucks. Pedestrian propelled trucks. Pallet trucks |
| EN 1757-3:2002 |
Safety of industrial trucks. Pedestrian propelled trucks. Platform trucks |
| EN 1757-4:2003 |
Safety of industrial trucks. Pedestrian propelled trucks. Scissor lift pallet-trucks |
| EN 1758:1998 |
Copper and copper alloys. Strip for lead frames |
| EN 1759-1:2004 |
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated. Steel flanges, NPS 1/2 to 24 |
| EN 1759-3:2003 |
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated. Copper alloy flanges |
| EN 1759-4:2003 |
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated. Aluminium alloy flanges |
| EN 1760-1:1998 |
Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1760-2:2001 |
Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 1760-3:2004 |
Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| EN 1761:1999 |
Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| EN 1762:2003 |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
| EN 1765:2004 |
Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| EN 1766:2000 |
Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing |
| EN 1767:1999 |
Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis |