| Standard No |
Title of Standard |
|
| EN 1770:1998 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion |
| EN 1772:2000 |
Surface active agents. Determination of wetting power by immersion |
| EN 1773:1997 |
Textiles. Fabrics. Determination of width and length |
| EN 1774:1998 |
Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid |
| EN 1775:1998 |
Gas supply. Gas pipework in buildings. Maximum operating pressure $3L 5 bar. Functional recommendations |
| EN 1776:1999 |
Gas supply. Natural gas measuring stations. Functional requirements |
| EN 1777:2004 |
Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing |
| EN 1778:2000 |
Characteristic values for welded thermoplastics constructions. Determination of allowable stresses and moduli for design of thermoplastics equipment |
| EN 1779:1999 |
Non-destructive testing. Leak testing. Criteria for method and technique selection |
| EN 1780-1:2002 |
Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Numerical designation system |
| EN 1780-2:2002 |
Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Chemical symbol based designation system |
| EN 1780-3:2002 |
Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Writing rules for chemical composition |
| EN 1782:1998 |
Tracheal tubes and connectors |
| EN 1783:1997 |
Matches. Performance requirements, safety and classification |
| EN 1784:2003 |
Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic analysis of hydrocarbons |
| EN 1785:2003 |
Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones |
| EN 1786:1997 |
Foodstuffs. Detection of irradiated food containing bone. Method by ESR spectroscopy |
| EN 1787:2000 |
Foodstuffs. Detection of irradiated food containing cellulose by ESR spectroscopy |
| EN 1788:2001 |
Foodstuffs. Thermoluminescence detection of irradiated food from which silicate minerals can be isolated |
| EN 1789:2000 |
Medical vehicles and their equipment. Road ambulances |
| EN 179:1998 |
Building hardware. Emergency exit devices operated by a lever handle or push pad. Requirements and test methods |
| EN 1790:1998 |
Road marking materials. Preformed road markings |
| EN 1791:1997 |
Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content |
| EN 1792:2003 |
Welding. Multilingual list of terms for welding and related processes |
| EN 1793-1:1998 |
Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of sound absorption |
| EN 1793-2:1998 |
Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation |
| EN 1793-3:1998 |
Road traffic noise reducing devices. Test method for determining the acoustic performance. Normalized traffic noise spectrum |
| EN 1794-1:2003 |
Road traffic noise reducing devices. Non-acoustic performance. Mechanical performance and stability requirements |
| EN 1794-2:2003 |
Road traffic noise reducing devices. Non-acoustic performance. General safety and environmental requirements |
| EN 1795:1998 |
Transportable gas cylinders (excluding LPG). Procedures for change of gas service |
| EN 1797:2001 |
Cryogenic vessels. Gas/material compatibility |
| EN 1797-1:1998 |
Cryogenic vessels. Gas/material compatibility. Oxygen compatibility |
| EN 1799:1999 |
Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface |
| EN 1800:1999 |
Transportable gas cylinders. Acetylene cylinders. Basic requirements and definitions |
| EN 1801:1999 |
Transportable gas cylinders. Filling conditions for single acetylene cylinders |
| EN 180101:1995 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed fibre optic attenuators |
| EN 1802:2002 |
Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| EN 1803:2002 |
Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders |
| EN 1804-1:2001 |
Machines for underground mines. Safety requirements for hydraulic powered roof supports. Support units and general requirements |
| EN 1804-2:2001 |
Machines for underground mines. Safety requirements for hydraulic powered roof supports. Power set legs and rams |
| EN 1806:2000 |
Chimneys. Clay/ceramic flue blocks for single wall chimneys. Requirements and test methods |
| EN 1807:1999 |
Safety of woodworking machines. Band sawing machines |
| EN 1808:1999 |
Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests |
| EN 1809:1998 |
Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods |
| EN 1810:1998 |
Body-piercing post assemblies. Reference test method for determination of nickel content by flame atomic absorption spectrometry |
| EN 181000:1995 |
Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices |
| EN 1811:1999 |
Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin |
| EN 181101:1995 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. |
| EN 181102:1995 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmission star |
| EN 181103:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. |
| EN 181104:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. |
| EN 1813:1998 |
Textile floor coverings. Determination of wool fibre integrity using an abrasion machine |
| EN 1814:1998 |
Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| EN 1815:1998 |
Resilient and textile floor coverings. Assessment of static electrical propensity |
| EN 1816:1998 |
Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing |
| EN 1817:1998 |
Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| EN 1818:1999 |
Resilient floor coverings. Determination of the effect of loaded heavy duty castors |
| EN 1820:1997 |
Anaesthetic reservoir bags |
| EN 1821-1:1997 |
Electrically propelled road vehicles. Measurement of road operating ability. Pure electric vehicles |
| EN 1821-2:1999 |
Electrically propelled road vehicles. Measurement of road operating ability. Thermal electric hybrid vehicles |
| EN 1822-1:1998 |
High efficiency air filters (HEPA and ULPA). Classification, performance testing, marking |
| EN 1822-2:1998 |
High efficiency air filters (HEPA and ULPA). Aerosol production, measuring equipment, particle counting statistics |
| EN 1822-3:1998 |
High efficiency air filters (HEPA and ULPA). Testing flat sheet filter media |
| EN 1822-4:2000 |
High efficiency air filters (HEPA and ULPA). Determining leakage of filter element (scan method) |
| EN 1822-5:2000 |
High efficiency air filters (HEPA and ULPA). Determining the efficiency of filter element |
| EN 1824:1998 |
Road marking materials. Road trials |
| EN 1825-1:2004 |
Grease separators. Principles of design, performance and testing, marking and quality control |
| EN 1825-2:2002 |
Grease separators. Selection of nominal size, installation, operation and maintenance |
| EN 1826:1997 |
Biotechnology. Large-scale process and production. Control procedures for raw materials |
| EN 1827:1999 |
Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements, testing, marking |
| EN 1828:2002 |
Health informatics. Categorial structure for classifications and coding systems of surgical procedures |
| EN 1834-1:2000 |
Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. |
| EN 1834-2:2000 |
Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. |
| EN 1834-3:2000 |
Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. |
| EN 1836:1997 |
Personal eye protection. Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
| EN 1837:1999 |
Safety of machinery. Integral lighting of machines |
| EN 1838:1999 |
Lighting applications. Emergency lighting |
| EN 1839:2003 |
Determination of explosion limits of gases and vapours |
| EN 1841:1999 |
Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 1842:1997 |
Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage |
| EN 1844:2001 |
Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing |
| EN 1845:1999 |
Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| EN 1846-1:1998 |
Firefighting and rescue service vehicles. Nomenclature and designation |
| EN 1846-2:2001 |
Firefighting and rescue service vehicles. Common requirements. Safety and performance |
| EN 1846-3:2002 |
Firefighting and rescue service vehicles. Permanently installed equipment. Safety and performance |
| EN 1847:2001 |
Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals including water |
| EN 1848-1:2000 |
Flexible sheets for waterproofing. Determination of length, width and straightness. Bitumen sheets for roof waterproofing |
| EN 1848-2:2001 |
Flexible sheets for waterproofing. Determination of length, width and straightness. Plastic and rubber sheets for roof waterproofing |
| EN 1849-1:2000 |
Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing |
| EN 1849-2:2001 |
Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets for roof waterproofing |
| EN 1850-1:2000 |
Flexible sheets for waterproofing. Determination of visible defects. Bitumen sheets for roof waterproofing |
| EN 1850-2:2001 |
Flexible sheets for waterproofing. Determination of visible defects. Plastic and rubber sheets for roof waterproofing |
| EN 1852-1:1998 |
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system |
| EN 1853:1999 |
Agricultural machinery. Trailers with tipping body. Safety |
| EN 1854:1997 |
Pressure sensing devices for gas burners and gas burning appliances |
| EN 1856-1:2003 |
Chimneys. Requirements for metal chimneys. System chimney products |
| EN 1856-2:2004 |
Chimneys. Requirements for metal chimneys. Metal liners and connecting flue pipes |
| EN 1857:2003 |
Chimneys. Components. Concrete flue liners |
| EN 1858:2003 |
Chimneys. Components. Concrete flue blocks |
| EN 1859:2000 |
Chimneys. Metal chimneys. Test methods |
| EN 186000-1:1994 |
Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables. |
| EN 186001:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables. Environmental category I |
| EN 186002:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category II |
| EN 186003:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category III |
| EN 186004:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category IV |
| EN 186005:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category V |
| EN 186006-1:1996 |
Harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables for military use. Environmental category VI |
| EN 1860-1:2003 |
Appliances, solid fuels and firelighters for barbecueing. Barbecues burning solid fuels. Requirements and test methods |
| EN 1860-2:2005 |
Appliances, solid fuels and firelighters for barbecueing. Barbecue charcoal and barbecue charcoal briquettes. Requirements and test methods |
| EN 1860-3:2003 |
Appliances, solid fuels and firelighters for barbecueing. Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods |
| EN 1860-4:2004 |
Appliances, solid fuels and firelighters for barbecueing. Single use barbecues burning solid fuels. Requirements and test methods |
| EN 1861:1998 |
Refrigerating systems and heat pumps. System flow diagrams and piping and instrument diagrams. Layout and symbols |
| EN 186100:1995 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Types F-SMA |
| EN 186110:1995 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type FC |
| EN 186130:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSA |