| Standard No |
Title of Standard |
|
| EN 21974:1994 |
Paper. Determination of tearing resistance (Elmendorf method) |
| EN 22063:1994 |
Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys |
| EN 22206:1993 |
Complete, filled transport packages. Method for identifying parts when testing |
| EN 22248:1993 |
Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping |
| EN 22313:1992 |
Textile fabrics. Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery |
| EN 22339:1992 |
Taper pins, unhardened |
| EN 22340:1992 |
Clevis pins without head |
| EN 22341:1992 |
Clevis pins with head |
| EN 2236:1992 |
Pins, headed, close tolerance shank, in alloy steel. Technical specification |
| EN 22401:1994 |
Covered electrodes. Determination of the efficiency, metal recovery and deposition coefficient |
| EN 2243-2:1991 |
Structural adhesives. Test methods. Peel metal-metal |
| EN 2243-3:1992 |
Structural adhesives. Test methods. Peeling test metal-honeycomb core |
| EN 2243-4:1991 |
Structural adhesives. Test methods. Metal-honeycomb core flatwise tensile test |
| EN 2243-5:1992 |
Test methods for structural adhesives. Ageing tests |
| EN 22553:1995 |
Welded, brazed and soldered joints. Symbolic representation on drawings |
| EN 2256:2004 |
Aerospace series. Aluminium alloy AL-P2618A-T852. Hand and die forgings. a $3L 150 mm |
| EN 2257:1997 |
Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm $3L $iD $3L 100 mm. Thickness 1 mm $3L $ia $3L 6 mm. Dimensions |
| EN 2258:1997 |
Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm $3L $iD $3L 100 mm. Thickness 0,6 mm $3L $ia $3L 2,5 mm. Dimensions |
| EN 2259:1995 |
Silicone rubber (VMQ). Hardness 50 IRHD |
| EN 2260:1995 |
Silicone rubber (VMQ). Hardness 60 IRHD |
| EN 2261:1995 |
Silicone rubber (VMQ). Hardness 70 IRHD |
| EN 2262:1995 |
Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD |
| EN 2264:1996 |
Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS$d2 lubricated. Classification: 900 MPa (at ambient temperature) /235$0DC |
| EN 22768-1:1993 |
General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications |
| EN 22768-2:1993 |
General tolerances. Geometrical tolerances for features without individual tolerance indications |
| EN 228:2004 |
Automotive fuels. Unleaded petrol. Requirements and test methods |
| EN 2282:1992 |
Characteristics of aircraft electrical supplies |
| EN 2283:1996 |
Testing of aircraft wiring |
| EN 2284:1991 |
Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys |
| EN 2285:1990 |
Specification for bushes plain, aluminium alloy with self-lubricating liner. Dimensions and loads |
| EN 22858:1993 |
End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions |
| EN 2286:1990 |
Specification for bushes flanged, aluminium alloy with self-lubricating liner. Dimensions and loads |
| EN 2287:1990 |
Specification for bushes plain, corrosion resisting steel with self-lubricating liner. Dimensions and loads |
| EN 22872:1993 |
Complete, filled transport packages. Method for determination of resistance to compression |
| EN 22874:1993 |
Complete, filled transport packages. Method of test for stacking using compression tester |
| EN 22876:1993 |
Complete, filled transport packages. Method for determination of resistance to damage by rolling |
| EN 2288:1990 |
Specification for bushes flanged, corrosion resisting steel with self-lubricating liner. Dimensions and loads |
| EN 2289:1996 |
Rod bodies in aluminium alloy for flight controls. Technical specification |
| EN 2290-1:1998 |
Rod bodies, flight control in aluminium alloy, for adjustable end fittings. Dimensions and loads |
| EN 230:1991 |
Specification for monobloc oil burners. Safety, control and regulation devices and safety times |
| EN 230:2005 |
Automatic burner control systems for oil burners |
| EN 23015:1994 |
Petroleum products. Determination of cloud point |
| EN 23035:1994 |
Single-faced and single-wall corrugated fibreboard. Determination of flat crush resistance |
| EN 2309:1990 |
Specification for hole sizes for solid rivets |
| EN 2310:1991 |
Test methods for the flame resistance rating of non-metallic materials |
| EN 2311:1990 |
Specification for bushes with self-lubricating liner. Technical specification |
| EN 2318:1992 |
Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm $3L a or D $3L 150 mm |
| EN 232:2003 |
Baths. Connecting dimensions |
| EN 2326:1992 |
Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D $3L 200 mm |
| EN 2327:1989 |
Specification for washers, lock with radial serrations in alloy steel. Dimensions |
| EN 23270:1991 |
Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
| EN 2328:1990 |
Specification for washers, tab for flight control rods. Dimensions |
| EN 2329:1993 |
Textile glass fibre preimpregnates. Test method for the determination of mass per unit area |
| EN 233:1999 |
Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| EN 2330:1993 |
Textile glass fibre preimpregnates. Test method for the determination of the content of volatile matter |
| EN 2331:1993 |
Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area |
| EN 23312:1993 |
Sintered metal materials and hardmetals. Determination of Young modulus |
| EN 2332:1993 |
Textile glass fibre preimpregnates. Test method for the determination of the resin flow |
| EN 23326:1993 |
Specification for hardmetals. Determination of (the magnetization) coercivity |
| EN 23327:1993 |
Hardmetals. Determination of transverse rupture strength |
| EN 2334:1997 |
Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| EN 2335:1990 |
Specification for bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads |
| EN 2336:1990 |
Specification for bearings-spherical plain in steel with assembly slots. Dimensions and loads |
| EN 23369:1993 |
Impermeable sintered metal materials and hardmetals. Determination of density |
| EN 2337:1996 |
Spherical plain bearings. Technical specification |
| EN 2338:2001 |
Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm $3L a $3L 6 mm. Dimensions |
| EN 2339:2001 |
Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm $3L a $3L 6 mm. Dimensions |
| EN 234:1997 |
Wallcoverings in roll form. Specification for wallcoverings for subsequent decoration |
| EN 2344:2001 |
Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm $0L D $0L 180 mm. Dimensions |
| EN 2348:1989 |
Specification for control cable assemblies. Technical specification |
| EN 235:2002 |
Wallcoverings. Vocabulary and symbols |
| EN 2350:1991 |
Circuit breakers. Technical specification |
| EN 2353:1989 |
Specification for turnbarrels, control cable in corrosion resisting steel. Dimensions and loads |
| EN 2354:1989 |
Specification for eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads |
| EN 2355:1989 |
Specification for fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads |
| EN 2356:1989 |
Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads |
| EN 2357:1989 |
Specification for stud-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| EN 2358:1989 |
Specification for eye-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| EN 2359:1989 |
Specification for fork-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| EN 2360:1989 |
Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| EN 2361:1989 |
Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| EN 2362:1989 |
Specification for ball-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| EN 2363:1989 |
Specification for locking clips for turnbuckles of control cables. Dimensions |
| EN 2364:1989 |
Specification for pins, shear headed, close tolerance |
| EN 2365:1989 |
Specification for collars, aluminium alloy |
| EN 23661:1993 |
End-suction centrifugal pumps. Baseplate and installation dimensions |
| EN 2367:1990 |
Specification for split pins in steel EN 2573 |
| EN 237:1996 |
Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| EN 2374:1991 |
Specification for glass fibre reinforcing mouldings and sandwich composites. Production of test panels |
| EN 2375:1992 |
Resin preimpregnated materials. Production batch sampling procedure |
| EN 23758:1994 |
Textiles. Care labelling code using symbols |
| EN 2377:1989 |
Specification for glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength |
| EN 2378:1994 |
Fibre reinforced plastics. Determination of water absorption by immersion |
| EN 238:1996 |
Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry |
| EN 2381:1992 |
Aluminium alloy AL-P7009-T7452. Hand forgings 40 mm $3L a $3L 150 mm |
| EN 2384:1992 |
Aluminium alloy AL-P2014A-T6511. Extruded bars and sections a or D $3L 150 mm |
| EN 2385:1992 |
Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D $3L 125 mm |
| EN 23878:1993 |
Hardmetals. Vickers hardness test |
| EN 23907:1993 |
Hardmetals. Determination of total carbon content. Gravimetric method |
| EN 23908:1993 |
Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method |
| EN 23909:1994 |
Hardmetals. Determination of cobalt. Potentiometric method |
| EN 23923-1:1993 |
Metallic powders. Determination of apparent density. Funnel method |
| EN 23923-2:1993 |
Metallic powders. Determination of apparent density. Scott volumeter method |
| EN 2395:1994 |
Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip 0,4 mm $3L a $3L 6 mm |
| EN 23954:1993 |
Powders for powder metallurgical purposes. Sampling |
| EN 23995:1993 |
Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts |
| EN 24003:1993 |
Permeable sintered metal materials. Determination of bubble test pore size |
| EN 24006:1993 |
Measurement of fluid flow in closed conduits. Vocabulary and symbols |
| EN 24015:1992 |
Hexagon head bolts. Product grade B. Reduced shank (shank diameter pitch diameter) |
| EN 241:2000 |
Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method |
| EN 2413:1995 |
Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235$0DC |
| EN 24178:1993 |
Specification for information to be recorded in distribution trials involving complete, filled transport packages |
| EN 24180-1:1993 |
Guide to compilation of performance test schedules for complete, filled transport packages. General principles |
| EN 24180-2:1993 |
Guide to compilation of performance test schedules for complete, filled transport packages. Quantitative data |
| EN 24185:1993 |
Measurement of fluid flow in closed conduits. Weighing method |