Glossary of BC, ISO, and EN Standards

EN 50109-2-5:1996 Onwards

Standard No Title of Standard
EN 50109-2-5:1996 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements.
EN 50110-1:1997 Operation of electrical installations. Minimum requirements
EN 50110-2:1997 Operation of electrical installations. National annexes
EN 50112:1996 Measurement, control, regulation. Electrical temperature sensors. Metal protecting tubes for TC assemblies
EN 50113:1996 Measurement, control, regulation. Electrical temperature sensors. Isolating tubes for thermocouples
EN 50116:1996 Information technology equipment. Routine electrical safety testing in production
EN 50117-1:2002 Coaxial cables. Generic specification
EN 50117-2-1:2002 Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1000 MHz
EN 50117-2-2:2004 Coaxial cables. Sectional specification for cables used in cabled distribution networks
EN 50117-2-3:2004 Coaxial cables. Sectional specification for cables used in cabled distribution networks
EN 50117-2-4:2004 Coaxial cables. Sectional specification for cables used in cabled distribution networks
EN 50117-2-5:2004 Coaxial cables. Sectional specification for cables used in cabled distribution networks
EN 50117-3:1996 Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables
EN 50117-3-1:2002 Coaxial cables. Sectional specifications for cables used in telecom applications. Miniaturized cables used in digital communication systems
EN 50117-4:1996 Coaxial cables used in cabled distribution networks. Sectional specification for distribution and trunk cables
EN 50117-5:1997 Coaxial cables used in cabled distribution networks. Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
EN 50117-6:1997 Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
EN 50119:2001 Railway applications. Fixed installations. Electric traction overhead contact lines
EN 50121-1:2000 Railway applications. Electromagnetic compatibility. General
EN 50121-2:2000 Railway applications. Electromagnetic compatibility. Emission of the whole railway system to the outside world
EN 50121-3-1:2000 Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle
EN 50121-3-2:2000 Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
EN 50121-4:2000 Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus
EN 50121-5:2000 Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
EN 50122-1:1998 Railway applications. Fixed installations. Protective provisions relating to electrical safety and earthing
EN 50122-2:1999 Railway applications. Fixed installations. Protective provisions against the effects of stray currents caused by d.c. traction systems
EN 50123-1:2003 Railway applications. Fixed installations. D.C. switchgear. General
EN 50123-2:2003 Railway applications. Fixed installations. D.C. switchgear. D.C. circuit breakers
EN 50123-3:2003 Railway applications. Fixed installations. D.C. switchgear. Indoor d.c. disconnectors, switch-disconnectors and earthing switches
EN 50123-4:2003 Railway applications. Fixed installations. D.C. switchgear. Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
EN 50123-5:2003 Railway applications. Fixed installations. D.C. switchgear. Surge arresters and low-voltage limiters for specific use in d.c. systems
EN 50123-6:2003 Railway applications. Fixed installations. D.C. switchgear. D.C. switchgear assemblies
EN 50123-7-1:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems.
EN 50123-7-2:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems.
EN 50123-7-3:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems.
EN 50124-1:2001 Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
EN 50124-2:2001 Railway applications. Insulation coordination. Overvoltages and related protection
EN 50125-1:1999 Railway applications. Environmental conditions for equipment. Equipment on board rolling stock
EN 50125-2:2002 Railway applications. Environmental conditions for equipment. Fixed electrical installations
EN 50125-3:2003 Railway applications. Environmental conditions for equipment. Equipment for signalling and telecommunications
EN 50126:1999 Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
EN 50128:2001 Railway applications. Communications, signalling and processing systems. Software for railway control and protection systems
EN 50129:2003 Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling
EN 50130-4:1996 Alarm systems. Electromagnetic compatibility. Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
EN 50130-5:1999 Alarm systems. Environmental test methods
EN 50131-1:1997 Alarm systems. Intrusion systems. General requirements
EN 50131-6:1998 Alarm systems. Intrusion systems. Power supplies
EN 50132-2-1:1998 Alarm systems. CCTV surveillance systems for use in security applications. Black and white cameras
EN 50132-4-1:2001 Alarm systems. CCTV surveillance systems for use in security applications. Black and white monitors
EN 50132-5:2001 Alarm systems. CCTV surveillance systems for use in security applications. Video transmission
EN 50132-7:1996 Alarm systems. CCTV surveillance systems for use in security applications. Application guidelines
EN 50133-1:1997 Alarm systems. Access control systems for use in security applications. System requirements
EN 50133-2-1:2000 Alarm systems. Access control systems for use in security applications. General requirements for components
EN 50133-7:1999 Alarm systems. Access control systems for use in security applications. Application guidelines
EN 50134-1:2002 Alarm systems. Social alarm systems. System requirements
EN 50134-2:2000 Alarm systems. Social alarm systems. Trigger devices
EN 50134-3:2001 Alarm systems. Social alarm systems. Local unit and controller
EN 50134-5:2004 Alarm systems. Social alarm systems. Interconnections and communications
EN 50136-1-1:1998 Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission systems
EN 50136-1-2:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for systems using dedicated alarm paths
EN 50136-1-3:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for systems with digital communicators using the public switched telephone network
EN 50136-1-4:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for systems with voice communicators using the public switched telephone network
EN 50136-2-1:1998 Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission equipment
EN 50136-2-2:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems using dedicated alarm paths
EN 50136-2-3:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with digital communicators using the public switched telephone network
EN 50136-2-4:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with voice communicators using the public switched telephone network
EN 50143:1999 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
EN 50144-1:1996 Safety of hand-held electric motor operated tools. General requirements
EN 50144-2-1:2000 Safety of hand-held electric motor operated tools. Particular requirements for drills
EN 50144-2-10:2001 Safety of hand-held electric motor operated tools. Particular requirements for jig saws
EN 50144-2-11:1997 Safety of hand-held electric motor operated tools. Particular requirements for sabre saws and double blade reciprocating saws
EN 50144-2-13:2002 Safety of hand-held electric motor operated tools. Particular requirements for chain saws
EN 50144-2-14:2001 Safety of hand-held electric motor operated tools. Particular requirements for planers
EN 50144-2-15:2001 Safety of hand-held electric motor operated tools. Particular requirements for hedge trimmers
EN 50144-2-16:2003 Safety of hand-held electric motor operated tools. Particular requirements for tackers
EN 50144-2-17:2000 Safety of hand-held electric motor operated tools. Particular requirements for routers
EN 50144-2-18:2000 Safety of hand-held electric motor operated tools. Particular requirements for laminate trimmers
EN 50144-2-2:2000 Safety of hand-held electric motor operated tools. Particular requirements for screwdrivers and impact wrenches
EN 50144-2-3:2002 Safety of hand-held electric motor operated tools. Particular requirements for grinders, disk type sanders and polishers
EN 50144-2-4:2000 Safety of hand-held electric motor operated tools. Particular requirements for sanders
EN 50144-2-5:2000 Safety of hand-held electric motor operated tools. Particular requirements for circular saws and circular knives
EN 50144-2-6:2001 Safety of hand-held electric motor operated tools. Particular requirements for hammers
EN 50144-2-7:2001 Safety of hand-held electric motor operated tools. Particular requirements for spray guns
EN 50144-2-8:1996 Safety of hand-held electric motor operated tools. Particular requirements for sheet metal shears and nibblers
EN 50144-2-9:1996 Safety of hand-held electric motor operated tools. Particular requirements for tappers
EN 50146:2000 Cable ties for electrical installations
EN 50147-1:1997 Anechoic chambers. Shield attenuation measurement
EN 50147-2:1997 Anechoic chambers. Alternative test site suitability with respect to site attenuation
EN 50148:1996 Electronic taximeters
EN 50149:2001 Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
EN 50151:2003 Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators
EN 50152-1:1999 Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase circuit-breakers with $iU$dm above 1 kV
EN 50152-2:1999 Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase disconnectors, earthing switches and switches with $iU$dm above 1 kV
EN 50152-3-1:2003 Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systems
EN 50152-3-2:2001 Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systems.
EN 50152-3-3:2001 Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systems.
EN 50153:2002 Railway applications. Rolling stock. Protective provisions relating to electrical hazards
EN 50155:2001 Railway applications. Electronic equipment used on rolling stock
EN 50156-1:2004 Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation
EN 50157-1:1999 Domestic and similar electronic equipment interconnection requirements: AV. link. General
EN 50157-2-1:1999 Domestic and similar electronic equipment interconnection requirements: AV. link. Signal quality matching and automatic selection of source devices
EN 50157-2-2:1999 Domestic and similar electronic equipment interconnection requirements: AV. link. Basis system oriented commands
EN 50157-2-3:1999 Domestic and similar electronic equipment interconnection requirements: AV. link. System oriented application
EN 50159-1:2001 Railway applications. Communication, signalling and processing systems. Safety related communication in closed transmission systems
EN 50159-2:2001 Railway applications. Communication, signalling and processing systems. Safety related communication in open transmission systems
EN 50160:2000 Voltage characteristics of electricity supplied by public distribution systems
EN 50162:2004 Protection against corrosion by stray current from direct current systems
EN 50163:2004 Railway applications. Supply voltages of traction systems
EN 50164-1:2000 Lightning protection components (LPC). Requirements for connection components
EN 50164-2:2002 Lightning protection components (LPC). Requirements for conductors and earth electrodes
EN 50165:1997 Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements
EN 50171:2001 Central power supply systems
EN 50172:2004 Emergency escape lighting systems
EN 50173-1:2002 Information technology. Generic cabling systems. General requirements and office areas
EN 50174-1:2001 Information technology. Cabling installation. Specification and quality assurance



© Copyright. . Standards Direct. All Rights Reserved. Terms | Site Map