Glossary of BC, ISO, and EN Standards

EN 60645-1:2001 Onwards

Standard No Title of Standard
EN 60645-1:2001 Audiometers. Pure-tone audiometers
EN 60645-2:1997 Audiometers. Equipment for speech audiometry
EN 60645-3:1995 Audiometers. Auditory test signals of short duration for audiometric and neuro-otological purposes
EN 60645-4:1995 Audiometers. Equipment for extended high-frequency audiometry
EN 60645-5:2005 Electroacoustics. Audiometric equipment. Instruments for the measurement of aural acoustic impedance/admittance
EN 60646:1999 Test methods for crucible induction furnaces
EN 60652:2004 Loading tests on overhead line structures
EN 60654-1:1993 Industrial-process measurement and control equipment. Operating conditions. Climatic conditions
EN 60654-2:1998 Operating conditions for industrial-process measurement and control equipment. Power
EN 60654-3:1998 Operating conditions for industrial-process measurement and control equipment. Mechanical influences
EN 60654-4:1998 Operating conditions for industrial-process measurement and control equipment. Corrosive and erosive influences
EN 60660:2000 Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
EN 60661:2001 Methods for measuring the performance of electric household coffee makers
EN 60664-1:2003 Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests
EN 60664-3:2003 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution
EN 60664-5:2003 Insulation coordination for equipment within low-voltage systems. A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
EN 60669-1:2000 Switches for household and similar fixed electrical installations. General requirements
EN 60669-2-1:2004 Switches for household and similar fixed electrical installations. Particular requirements. Electronic switches
EN 60669-2-2:1998 Switches for household and similar fixed electrical installations. Particular requirements. Remote-control switches (RCS)
EN 60669-2-3:1999 Switches for household and similar fixed electrical installations. Particular requirements. Time-delay switches (TDS)
EN 60669-2-4:2005 Switches for household and similar fixed electrical installations. Particular requirements
EN 60672-1:1996 Ceramic and glass insulating materials. Definitions and classification
EN 60672-2:2000 Ceramic and glass insulating materials. Methods of test
EN 60672-3:1998 Ceramic and glass insulating materials. Specifications for individual materials
EN 60674-1:1998 Specification for plastic films for electrical purposes. Definitions and general requirements
EN 60674-2:1998 Specification for plastic films for electrical purposes. Methods of test
EN 60674-3-1:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Biaxially oriented polypropylene (PP) films for capacitors
EN 60674-3-2:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films
EN 60674-3-3:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for polycarbonate (PC) films used for electrical insulation
EN 60674-3-4 to 6:1995 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for polyimide films used for electrical insulation
EN 60674-3-7:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation
EN 60675:1995 Household electric direct-acting room heaters. Methods for measuring performance
EN 60676:2002 Industrial electroheating equipment. Test methods for direct arc furnaces
EN 60679-1:1998 Quartz crystal controlled oscillators of assessed quality. Generic specification
EN 60679-3:2002 Quartz crystal controlled oscillators of assessed quality. Standard outlines and lead connections
EN 60679-4:1998 Quartz crystal controlled oscillators of assessed quality. Sectional specification. Capability approval
EN 60679-4-1:1998 Quartz crystal controlled oscillators of assessed quality. Blank detail specification. Capability approval
EN 60679-5:1998 Quartz crystal controlled oscillators of assessed quality. Sectional specification. Qualification approval
EN 60679-5-1:1998 Quartz crystal controlled oscillators of assessed quality. Blank detail specification. Qualification approval
EN 60682:1994 Method for measuring the pinch temperature of quartz-tungsten-halogen lamps
EN 60684-1:2003 Flexible insulating sleeving. Definitions and general requirements
EN 60684-2:1997 Flexible insulating sleeving. Methods of test
EN 60684-3-100 to 105:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded PVC sleeving
EN 60684-3-116 and 117:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded polychloroprene. General purpose
EN 60684-3-121 to 124:2001 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Specifications for individual types of sleeving. Extruded silicone sleeving
EN 60684-3-136:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded fluorosilicone sleeving. General purpose
EN 60684-3-145 to 147:2001 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded PTFE sleeving
EN 60684-3-151:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded PVC/nitrile rubber. General purpose
EN 60684-3-165:2004 Flexible insulating sleeving. Specifications for individual types of sleeving
EN 60684-3-209:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1
EN 60684-3-211:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
EN 60684-3-212:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2:1
EN 60684-3-213:1999 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1
EN 60684-3-217:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1
EN 60684-3-218:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1
EN 60684-3-228:2004 Flexible insulating sleeving. Specification requirements for individual types of sleeving
EN 60684-3-229:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving
EN 60684-3-233:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
EN 60684-3-240 to 243:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable PTFE sleeving
EN 60684-3-246:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, dual-wall, not flame retarded
EN 60684-3-271:2004 Flexible insulating sleeving. Specifications for individual types of sleeving
EN 60684-3-300:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile fibre sleeving, braided, uncoated
EN 60684-3-320:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Polyethylene terephthalate textile sleeving, lightly impregnated
EN 60684-3-340 to 342:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Expandable braided polyethylene terephthalate textile sleeving
EN 60684-3-343 to 345:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
EN 60684-3-400 to 402:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with silicone elastomer coating
EN 60684-3-403 to 405:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with acrylic based coating
EN 60684-3-406 to 408:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with PVC coating
EN 60684-3-409:1999 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with polyurethane (PUR)-based coating
EN 60684-3-420 to 422:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Polyethylene terephthalate textile sleeving with acrylic based coating
EN 60687:1993 Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
EN 60688:1992 Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals
EN 60691:1996 Thermal links. Requirements and application guide
EN 60691:2003 Thermal-links. Requirements and application guide
EN 60694:1997 Common specifications for high-voltage switchgear and controlgear standards
EN 60695-10-2:2003 Fire hazard testing. Abnormal heat. Ball pressure test
EN 60695-10-3:2002 Fire hazard testing. Abnormal heat. Mould stress relief distortion test
EN 60695-1-1:2000 Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products. General guidelines
EN 60695-11-10:1999 Fire hazard testing. Test flames. 50 W horizontal and vertical flame test methods
EN 60695-11-2:2003 Fire hazard testing. Test flames. 1 kW nominal pre-mixed flame
EN 60695-11-20:1999 Fire hazard testing. Test flames. 500 W flame test methods
EN 60695-11-5:2005 Fire hazard testing. Test flames
EN 60695-1-30:2002 Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products. Use of preselection testing procedures
EN 60695-2-10:2001 Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
EN 60695-2-11:2001 Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products
EN 60695-2-12:2001 Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for materials
EN 60695-2-13:2001 Fire hazard testing. Test methods. Glowing/hot-wire based tests methods. Glow-wire ignitability test method for materials
EN 60695-2-4/0:1993 Fire hazard testing. Diffusion type and premixed type flame test methods
EN 60695-4:1996 Fire hazard testing. Terminology concerning fire tests
EN 60695-5-1:2003 Fire hazard testing. Assessment of potential corrosion damage by fire effluent. General guidance
EN 60695-6-1:2001 Fire hazard testing. Smoke opacity. General guidance
EN 60695-7-1:2004 Fire hazard testing. Toxicity of fire effluent
EN 60695-8-1:2001 Fire hazard testing. Heat release. General guidance
EN 60695-9-1:1999 Fire hazard testing. Surface spread of flame. General guidance
EN 607:1996 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
EN 60700-1:1999 Thyristor valves for high voltage direct current (HVDC) power transmission. Electrical testing
EN 60702-1:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables
EN 60702-2:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations
EN 60704-1:1995 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. General requirements
EN 60704-1:1997 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. General requirements
EN 60704-2-1:2001 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Particular requirements for vacuum cleaners
EN 60704-2-10:2004 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric cooking ranges, ovens, grills, microwave ovens
EN 60704-2-11:1999 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Electrically operated food preparation appliances
EN 60704-2-13:2000 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Particular requirements for range hoods
EN 60704-2-2:1995 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Forced draught convection heaters
EN 60704-2-3:2002 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for dishwashers
EN 60704-2-4:2001 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for washing machines and spin extractors
EN 60704-2-5:1995 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Room heaters of the storage type
EN 60704-2-6:1995 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Tumble-dryers
EN 60704-2-6:2004 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for tumble dryers
EN 60704-2-7:1998 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Particular requirements for fans
EN 60704-2-8:1997 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric shavers
EN 60704-2-9:2003 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric hair care appliances
EN 60704-3:1995 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Procedure for determining and verifying declared noise emission values
EN 60705:1999 Household microwave ovens. Methods for measuring performance



© Copyright. . Standards Direct. All Rights Reserved. Terms | Site Map